Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Manifolds for domestic H&C
Embarking on a total replumbing the house (2 bathrooms,2sinks and a
toilet/washbasin) in conjunction with a new boiler & heat bank. Looking at the logistics of the job I'm atrracted to the idea of using a hot and a cold manifold with outlet valves. A search of the group archives only has "CH with manifold" references. The pdf at http://www.marleyplumbinganddrainage...tor_design.pdf talks up the system. Has anyone either direct experience or any comments on the benefits/drawbacks of the system? PeterK |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Aluminum Exhaust Manifolds? | Metalworking | |||
Washer dryer - h&C inlet - use only one | UK diy | |||
FS Hydraulic manifolds w/silenoid valve | Metalworking | |||
Microbore Manifolds | UK diy | |||
Success! Got both manifolds off 2.2L (1987 caravan) | Metalworking |