Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Rads don't need balancing...
I've got 22 between boiler and upstairs and downstairs and upper and lower
circuits T'd off in 15. With such a system and my new combi it seems there is little need to balance. I've turned the pump speed down to it's minimum and most the rads are open full bore. I've just tweaked a little for one double rad that was a little reluctant. I will check the temp drops soon but they are all good and hot. In fact something not mentioned elsewhere that I've seen is that restriction unless really needed with a system that has no problem getting the water round just seems to result in a bloody whistling racket. I've not put the TVR's back on yet. No doubt I'll get a bloddy whistling racket back then anyway :-( -- Mike W |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Water only, some rads piping hot | UK diy | |||
balancing rads - flow rate - banging boiler/pipes | UK diy | |||
cold rads | UK diy | |||
balancing rads - return hotter than feed? | UK diy | |||
Balancing | UK diy |