Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Source for balanced flue components?
I am refitting the stainless steel balanced flue for the oil boiler.
It goes straight out just above the boiler. Ideally I'd like to move the boiler a little (perhaps 50mm) away from the wall to simplify cleaning around the boiler. To do that I need a lengths of suitable flue tubes (round & square section). Does anyone know of a supplier of parts for balanced flues? Midlands-SEast axis ideal, but anywhere in UK? TIA |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Worcester Bosch 24i Junior - boiler flue fitting query | UK diy | |||
Question regarding FET with low Drain to Source capacitance - FET_termination.jpg (0/1) | Electronics | |||
Correct to -- Question regarding FET with low Drain to Source capacitance - FET_termination.jpg (0/1) | Electronics | |||
Flue recall/replacement questions... | Home Repair | |||
Questions on fitting a stove and flue | UK diy |