Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Help to identify tap part
Hi
I have been trying to obtain a new valve for my tap, but without luck. I have been to all the sheds and plumbers merchants locally and none of them stock or have seen what I need. The tap is only a few years old, but does not have any identifiable markings or serial number to go by. The part I need is the barrel/valve from the inside of the hot handle. This is a quarter turn 'franke' type (but not Franke) tap. You will see from the pics that the part is plastic, measures 3.5cm in diameter and about 6cm in length. Any ideas of someone who would stock anything like this? http://aycu12.webshots.com/image/405...0552003_rs.jpg http://aycu30.webshots.com/image/566...8676314_rs.jpg http://aycu38.webshots.com/image/563...8395757_rs.jpg |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
2 Part Epoxy vs. One Part for Garage floor? | Home Repair | |||
Help finding old router part | Woodworking | |||
Identify this part? | Home Repair | |||
Part P Proto-FAQ | UK diy | |||
Part P - new cable colours | UK diy |