If you need a true 90 degree soil pipe bend (not 92.5), where can you
get one from ? If for example you need to exit a wall, turn left to the
soil pipe, then that is what you need.
Or do folks make do with 92.5 and force the connectors ?
Cheers,
Simon.

"sm_jamieson" wrote in message
ups.com...
If you need a true 90 degree soil pipe bend (not 92.5), where can you
get one from ? If for example you need to exit a wall, turn left to the
soil pipe, then that is what you need.

Marley SB47 as I mentioned before when you weren't listening

Jim A

sm_jamieson wrote:

If you need a true 90 degree soil pipe bend (not 92.5), where can you
get one from ? If for example you need to exit a wall, turn left to the
soil pipe, then that is what you need.
Or do folks make do with 92.5 and force the connectors ?

With the push fit version there is no need to force anything - they will
accept the pipe at quite a range of angles, and hence a true 90 is no
problem.

--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

sm_jamieson wrote:
If you need a true 90 degree soil pipe bend (not 92.5), where can you
get one from ? If for example you need to exit a wall, turn left to the
soil pipe, then that is what you need.
Or do folks make do with 92.5 and force the connectors ?
Cheers,
Simon.

'O'Ring socketed PVC Soil pipe will stand quite a lot of deformation
without leakage.

The further you get away from the 92.5 degree socket joint that
requires to be 90 degrees, i.e. the longer the pipe coming out of the
socket in any direction, the less deformation is required at the 'O'
ring joint.

I used to Demo for one of the first companies in the PVC Soil & Waste
systems market, (Marley Tile Company, then became Marley Plumbing). Did
same for Osma,& Bartol.

"Bookworm" wrote in message
oups.com...
sm_jamieson wrote:
If you need a true 90 degree soil pipe bend (not 92.5), where can you
get one from ? If for example you need to exit a wall, turn left to the
soil pipe, then that is what you need.
Or do folks make do with 92.5 and force the connectors ?
Cheers,
Simon.

'O'Ring socketed PVC Soil pipe will stand quite a lot of deformation
without leakage.


agreed

The further you get away from the 92.5 degree socket joint that
requires to be 90 degrees, i.e. the longer the pipe coming out of the
socket in any direction, the less deformation is required at the 'O'
ring joint.


Hmmm... I think its still 2.5deg regardless of the length of the pipe,
that's 43mm per metre, which surprised me when I calculated it as I've never
found this issue a problem in practice, probably due to the tolerance that
you mention, not forgetting there are two bites at the tolerance per bend.

If the OP really wants 90 he could use 2x45 in one plane or 2x92.5 in two
planes.

Jim A