Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Ariston DIA 20 Boiler -- slow to start heating tap water
Our DIA 20 combi boiler, about 10 years old, has become slow to detect mains
water flow, ie we run the "hot" tap for ages before boiler activates. Then, once it has primed, it works OK. This response delay has been building up over the weeks. If tap is not used again for a while, same slowness thing occurs. The filling pressure from the filling loop is OK, and CH section works when asked for heat. Is there such a device as a flow detection valve that needs replacing? TIA |
Thread Tools | Search this Thread |
Display Modes | |
|
|