UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to uk.tech.digital-tv,uk.d-i-y
Roger Mills
 
Posts: n/a
Default Alba STB Questions

This is my first skirmish with Freeview since, technically, I live in a
non-freeview area.

I've inherited an Alba STB2NS from my son, since he has no signal at all in
the flat where he lives - in Cambridge.

Despite Freeview not being 'available' where I live (just outside Warwick, a
long way from the Sutton Coldfield transmitter, on the wrong side of Hatton
Hill) I can actually get quite a reasonable signal, and can get all the
channels except those on Mux D. [And that's with a standard Group-B aerial
rather than a wide-band jobby].

I have a couple a questions which I hope that owners of the same model of
STB may be able to answer. At the moment I have it connected to a single
TV - using a Scart cable - and also have a co-ax cable from the RF
loop-through socket to the TV's aerial socket.

If, with the STB running, I select a normal terrestrial channel on the TV, I
get a picture divided into 4 with a big black cross in the middle - plus all
the symptoms of vertical hold not working. If I put the STB on standby, the
terrestrial channels are ok. Is this normal, or is something wrong with it?
I had assumed that the signal coming out of the loop-though socket *should*
be ok, even with the STB in use - because you may want to record a digital
channel whilst watching a terrestrial channel. Am I missing something?

I haven't yet tried to record a digital channel, or even to connect a VCR to
the second Scart socket. But I note that the remote control has a button
labelled DTV/VCR. The only explanation in the manual says "used to switch
between digital TV and video". What does this actually do? Currently, when I
press it, the STB goes onto standby (allowing terrestrial channels to be
viewed). If I had a VCR connected, would it stay in the 'run' state (green
light) when this button was pressed - but allow terrestrial channels to be
viewed? How would I select the channel to be recorded? [The manual says SFA
about recording from the second scart!]

TIA.
--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored..
Messages sent to it may not be read for several weeks. PLEASE REPLY TO
NEWSGROUP!


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Questions, questions... Sailaway Woodworking 7 March 14th 06 10:03 PM
FAQ: Answering questions emailed direct to 'editor' Phil Addison UK diy 21 January 29th 06 10:38 PM
Shimming a Pre Hung Interior Door Questions jp232 Home Repair 2 June 18th 04 02:55 PM
Footings, frost-heave , and related questions ??? news.individual.net Home Repair 5 June 13th 04 05:16 AM
Plumbing drain/wall sizing questions in US bath remodel Wayne Whitney Home Repair 5 January 28th 04 05:01 PM


All times are GMT +1. The time now is 08:49 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"