UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
 
Posts: n/a
Default Solid Fuel Rayburn Sooty Kitchen

Hi.

We've recently inherited a solid fuel Rayburn which we have burning a
combination of wood and turf which works fairly well. The only problem
however is the dirt that builds up throughout the kitchen and other
rooms off of it very easily.

My wife is getting quite irate at the thought of having to clean the
kitchen from top to bottom every single day because there is so much
black soot/dust building up on counter tops and cupboards.

Is this normal for a solid fuel range or is it because Ive had to
relight it maybe 4 times in the past 2 months due to not being in the
house ? Ive not managed to conclusively determine whether cleaning it
all really well while its lit and running will keep things clean, or
whether its a natural feature of the range to cover everything in soot
all the time.

Any thoughts or opinions would be much appreciated.

Thanks.

  #2   Report Post  
Posted to uk.d-i-y
Chris Bacon
 
Posts: n/a
Default Solid Fuel Rayburn Sooty Kitchen

suibhne wrote:
Is this normal for a solid fuel range or is it because Ive had to
relight it maybe 4 times in the past 2 months due to not being in the
house ? Ive not managed to conclusively determine whether cleaning it
all really well while its lit and running will keep things clean, or
whether its a natural feature of the range to cover everything in soot
all the time.


Riddle it, and open the flue damper/close the dilution flap
a short time before you re-fuel. This will create a draught
and tend to suck ash into the thing instead of lots flying
out all over your kitchen. When you clean it, do it when
it's alight, but not roaring. Use a second-hand vacuum like
a Vax, connected via a long hose and wire, so that you can
put the vacuum *outside* while you vacuum out the range
(through the circular plug in the hotplate). Don't suck up
hot coals, or your vacuum cleaner may quickly self-destruct.
Be careful carrying ash outside, I'm sure you know this!

These things are a bit messy, but by being fairly careful
you can minimise the fallout.
  #4   Report Post  
Posted to uk.d-i-y
David W.E. Roberts
 
Posts: n/a
Default Solid Fuel Rayburn Sooty Kitchen


wrote in message
ps.com...
Hi.

We've recently inherited a solid fuel Rayburn which we have burning a
combination of wood and turf which works fairly well. The only problem
however is the dirt that builds up throughout the kitchen and other
rooms off of it very easily.

My wife is getting quite irate at the thought of having to clean the
kitchen from top to bottom every single day because there is so much
black soot/dust building up on counter tops and cupboards.

Is this normal for a solid fuel range or is it because Ive had to
relight it maybe 4 times in the past 2 months due to not being in the
house ? Ive not managed to conclusively determine whether cleaning it
all really well while its lit and running will keep things clean, or
whether its a natural feature of the range to cover everything in soot
all the time.


A long time since we had a solid fuel Raeburn, but I don't recall the amount
of mess you are describing.

Firstly, it sounds as though you don't have enough draft - when you open the
door to refuel the smoke and dust should get carried up the flue.

Secondly I wonder if your flue (including the top of the cooker) is sealed
100% - is smoke getting out anywhere? This is more of a worry because if the
house is filling with soot to the extent you describe it is possible that
Carbon Monoxide is also getting out. As with all fires, the gasses
(including partially combusted fuel and small solids) should go up the
chimney, not come out into the room.

If in doubt, get a qualified solid fuel stove installer to come and check
the installation. The installer should be able to check for leakage,
adequate draught etc. I presume you have your flue swept regularly.

I have never tried to burn turf - our Raeburn was supposed to burn peat but
we never tried - but perhaps you are not getting enough heat in the fire to
get the flue to draw adequately? If this is so I would guess you are likely
to 'clag up' your flue quite quickly.

Perhaps try burning just seasoned wood for a bit, and see if the stove
performs better. I presume that using wood and turf is a commercial
decision; they perform quite well with coke.

HTH
Dave R


  #5   Report Post  
Posted to uk.d-i-y
 
Posts: n/a
Default Solid Fuel Rayburn Sooty Kitchen


Sweeping the chimneys sounds most likely remedy. There should be enough
updraft such that even if not sealed no gasses or dust should emerge
into the room from the flue.
Or get a proper cooker.

cheers

Jacob



  #6   Report Post  
Posted to uk.d-i-y
David W.E. Roberts
 
Posts: n/a
Default Solid Fuel Rayburn Sooty Kitchen


wrote in message
oups.com...

Sweeping the chimneys sounds most likely remedy. There should be enough
updraft such that even if not sealed no gasses or dust should emerge
into the room from the flue.
Or get a proper cooker.


Grrrr.....as ex-Raeburn owner let me tell you that a Raeburn IS a proper
cooker.

Very versatile, heat the water as well, keeps the kitchen warm, boils a
kettle in nothing flat and is also just right for mashing beer overnight on
the top.

The 'Yuppies' who get gas Argas and Raeburns for the 'Country Kitchen' look
are only playing.

Oh, you do have to have a small backup cooker and an immersion heater for
August or you will fry :-)

Cheers

Dave R


  #7   Report Post  
Posted to uk.d-i-y
 
Posts: n/a
Default Solid Fuel Rayburn Sooty Kitchen

Thanks very much for all the pointers. The dodgy flue seems like the
most likely candidate because we had a chimney sweep come around and
tell us that we needed to have it fixed. The lining had come undone and
it wasn't sucking up like it should do.

Its good to know though that its not normal for smoke and ash to come
up the door when refuelling, so Im gonna get the chimney sorted out
asap.

Thanks again.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
20-20 Kitchen Design V6.1,Cabinet Vision Solid, Planit Millennium II [2CDs], TurboCAD Pro V9.0 [3 CDs] ( Turbocad Pro V9.0, TurboCad Deluxe 9.2FloorPlan v7.3, TurboProject Express v4S), Big Hammer Do It Yourself(Deck Designer v1, Fence Designer v5, P TEL UK diy 1 May 24th 05 04:09 PM
Identifying a Solid Fuel Stove/Range TOGGY UK diy 2 December 1st 03 08:14 PM
WTB 20/20 Software version 5.1 - 5.2 grimre Woodworking 2 November 2nd 03 08:33 PM
Planit Millennium II [2 CDs] new !, and other Kitchen Design 3D programscheap software for fitted kitchen design (¯`·...ø¤°`°¤TEL4 ¤°`°¤....·´¯)tel2003@pathfinder. Woodworking 1 October 6th 03 02:22 PM
Planit Millennium II [2 CDs] new !, and other Kitchen Design 3D programscheap software for fitted kitchen design (¯`·...ø¤°`°¤TEL4 ¤°`°¤....·´¯)tel2003@pathfinder. Woodworking 0 October 6th 03 08:08 AM


All times are GMT +1. The time now is 07:57 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"