a few years ago i could go into any of the diy sheds and but plastic trim
angle pieces, they did 12 x 12mm, 20 x 20, 30 x 30, 12 x 2mm and so on, in a
variety of colours, i still have some grey and pink stuff in my garage from
a past project.

Now i want a fair few lengths of the 12 x 2mm stuff, all the diy sheds seem
to have got rid of that stuff, all they seem to do now is either that fake
wood effect stuff in every colour except the wood i have, or white or black
only.

I'm after some light brown plastic angle, 12mm x 2mm or so, to trim around
the many cupboard door openings in my van, i need the stuff with a small lip
so it covers up the slight imperfections made by the saw blade as it scored
the vynal covering of the wood,

and the cupboards in a motorhome are not made like a carcas in a kitchen...
you take a sheet of wood for the front panel, mark out the openings where
you want them, cut them out, and use the cut out as the door trimmed with
some molding wood made for making cupboard doors.

The last way i trimmed the cut outs was to use knock in T molding, but i
dont want to use that on this van, i want a lip to cover the front of the
panel slightly around the cut out.

But where do i get light brown.. or cherry wood effect fake wood plastic
angle from nowadays?

CampinGazz wrote:
a few years ago i could go into any of the diy sheds and but plastic
trim angle pieces, they did 12 x 12mm, 20 x 20, 30 x 30, 12 x 2mm and
so on, in a variety of colours, i still have some grey and pink stuff
in my garage from a past project.

Now i want a fair few lengths of the 12 x 2mm stuff, all the diy
sheds seem to have got rid of that stuff, all they seem to do now is
either that fake wood effect stuff in every colour except the wood i
have, or white or black only.

I'm after some light brown plastic angle, 12mm x 2mm or so, to trim
around the many cupboard door openings in my van, i need the stuff
with a small lip so it covers up the slight imperfections made by the
saw blade as it scored the vynal covering of the wood,

and the cupboards in a motorhome are not made like a carcas in a
kitchen... you take a sheet of wood for the front panel, mark out the
openings where you want them, cut them out, and use the cut out as
the door trimmed with some molding wood made for making cupboard
doors.

The last way i trimmed the cut outs was to use knock in T molding,
but i dont want to use that on this van, i want a lip to cover the
front of the panel slightly around the cut out.

But where do i get light brown.. or cherry wood effect fake wood
plastic angle from nowadays?

Are you talking L shaped angle?



--
Sir Benjamin Middlethwaite

"The3rd Earl Of Derby" wrote in message
. uk...
Are you talking L shaped angle?

yes, 12mm on the long side, about 2mm on the short side, but in light brown,

CampinGazz wrote:
"The3rd Earl Of Derby" wrote in message
. uk...
Are you talking L shaped angle?

yes, 12mm on the long side, about 2mm on the short side, but in light
brown,

This sort?
http://www.screwfix.com/app/sfd/cat/...03087&id=51568
--
Sir Benjamin Middlethwaite

"CampinGazz" wrote in message
...
a few years ago i could go into any of the diy sheds and but plastic trim
angle pieces, they did 12 x 12mm, 20 x 20, 30 x 30, 12 x 2mm and so on, in
a variety of colours, i still have some grey and pink stuff in my garage
from a past project.

Now i want a fair few lengths of the 12 x 2mm stuff, all the diy sheds
seem to have got rid of that stuff, all they seem to do now is either that
fake wood effect stuff in every colour except the wood i have, or white or
black only.

I'm after some light brown plastic angle, 12mm x 2mm or so, to trim around
the many cupboard door openings in my van, i need the stuff with a small
lip so it covers up the slight imperfections made by the saw blade as it
scored the vynal covering of the wood,

and the cupboards in a motorhome are not made like a carcas in a
kitchen... you take a sheet of wood for the front panel, mark out the
openings where you want them, cut them out, and use the cut out as the
door trimmed with some molding wood made for making cupboard doors.

The last way i trimmed the cut outs was to use knock in T molding, but i
dont want to use that on this van, i want a lip to cover the front of the
panel slightly around the cut out.

But where do i get light brown.. or cherry wood effect fake wood plastic
angle from nowadays?
These people do some

http://www.pvcextrusions.co.uk/

On Fri, 10 Mar 2006 14:43:54 -0000, "CampinGazz" wrote:

a few years ago i could go into any of the diy sheds and but plastic trim
angle pieces, they did 12 x 12mm, 20 x 20, 30 x 30, 12 x 2mm and so on, in a
variety of colours, i still have some grey and pink stuff in my garage from
a past project.

Now i want a fair few lengths of the 12 x 2mm stuff, all the diy sheds seem
to have got rid of that stuff, all they seem to do now is either that fake
wood effect stuff in every colour except the wood i have, or white or black
only.

I'm after some light brown plastic angle, 12mm x 2mm or so, to trim around
the many cupboard door openings in my van, i need the stuff with a small lip
so it covers up the slight imperfections made by the saw blade as it scored
the vynal covering of the wood,

and the cupboards in a motorhome are not made like a carcas in a kitchen...
you take a sheet of wood for the front panel, mark out the openings where
you want them, cut them out, and use the cut out as the door trimmed with
some molding wood made for making cupboard doors.

The last way i trimmed the cut outs was to use knock in T molding, but i
dont want to use that on this van, i want a lip to cover the front of the
panel slightly around the cut out.

But where do i get light brown.. or cherry wood effect fake wood plastic
angle from nowadays?


Anything here ..??

http://www.pvcextrusions.co.uk/



Stuart

"Stuart" wrote in message
...
On Fri, 10 Mar 2006 14:43:54 -0000, "CampinGazz" wrote:
Anything here ..??

http://www.pvcextrusions.co.uk/

prolly loads if i wanted white or black

i dug out some of the trim i had left over from my last van, it's made by
homelux, i have some L section, 90 degree angle and some U section.. but all
in the wrong colour.. grey or pink,

th L and U section stuff has a lip of about 2mm which is what i want, all
the pvs extrusion sites i've looked at do the lip about 6mm when it's a 12mm
main part width.

but heck, i've got a bandsaw, so if i could just fond some 12mm angle in
light brown i could cut down one side.

homelux dont seem to have a website, so i can't easily ask them why all the
big diy stores stopped stocking their products.

CampinGazz wrote:
"Stuart" wrote in message
...
On Fri, 10 Mar 2006 14:43:54 -0000, "CampinGazz" wrote:
Anything here ..??

http://www.pvcextrusions.co.uk/

prolly loads if i wanted white or black

i dug out some of the trim i had left over from my last van, it's
made by homelux, i have some L section, 90 degree angle and some U
section.. but all in the wrong colour.. grey or pink,

th L and U section stuff has a lip of about 2mm which is what i want,
all the pvs extrusion sites i've looked at do the lip about 6mm when
it's a 12mm main part width.

but heck, i've got a bandsaw, so if i could just fond some 12mm angle
in light brown i could cut down one side.

homelux dont seem to have a website, so i can't easily ask them why
all the big diy stores stopped stocking their products.


Phone this shop they stock it in brown,whether they will mail order it I
don't know?
Other than that look up small handyman shops in you're area as some of
these still carry old stock.

Rapid Hardware
52 Renshaw Street
Liverpool Merseyside L1 4EN
Tel: (01517 082000)

--
Sir Benjamin Middlethwaite