UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
ron
 
Posts: n/a
Default self levelling laser leveller

Hi I am looking for a self levelling laser leveller to use when putting a
border round a room. It will only be for a one of job, hopefully, any
suggestions?
Ron


  #2   Report Post  
Posted to uk.d-i-y
Hybrid
 
Posts: n/a
Default self levelling laser leveller

"ron" wrote in message
. uk...
Hi I am looking for a self levelling laser leveller to use when putting a
border round a room. It will only be for a one of job, hopefully, any
suggestions?
Ron


B&Q were selling these off for £13.99 or you maybe lucky and find one in
Lidl for £9.99


  #3   Report Post  
Posted to uk.d-i-y
Tim Morley
 
Posts: n/a
Default self levelling laser leveller


"ron" wrote in message
. uk...
Hi I am looking for a self levelling laser leveller to use when putting a
border round a room. It will only be for a one of job, hopefully, any
suggestions?
Ron


I have tried cheap ones and they are pants!

I got the Black and Decker one (with power and pipe detection for future
use!!)

Marked up an entire room with 4 alcove areas, I was only 1mm out over the
"loop". Well impressed.



  #4   Report Post  
Posted to uk.d-i-y
Chris Bacon
 
Posts: n/a
Default self levelling laser leveller

Tim Morley wrote:
"ron" wrote...
Hi I am looking for a self levelling laser leveller to use when putting a
border round a room. It will only be for a one of job, hopefully, any
suggestions?


I got the Black and Decker one (with power and pipe detection for future
use!!)

Marked up an entire room with 4 alcove areas, I was only 1mm out over the
"loop". Well impressed.


By "1mm out", do you mean that the ends of your marks differed
by 1mm, or that the maximum the line was out was 1mm (if the
latter, how do you know?

I think I'd just use a decent level.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Laser Level Weatherlawyer UK diy 13 February 25th 06 09:21 PM
detect the laser from my laser level? HotRod Home Repair 6 September 23rd 05 04:58 PM
Laser level??? Sorta........ Tom Metalworking 9 December 30th 03 10:19 AM
Argon Laser, 150mW, American Laser Spudley Electronics 0 October 3rd 03 06:19 AM
JDS Uniphase SLM uGreen 532 nm DPSS Laser problems Sam Goldwasser Electronics Repair 0 July 15th 03 03:50 PM


All times are GMT +1. The time now is 09:09 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"