Drayton Digistat SCR Wireless System - Drayton Digistat RF1 Wireless System.

This is intended to replace the Drayton manual thermostat, which is located on the outside of the ‘airing cupboard’ on the landing.

A Glow Worm Micron 80FF Fanned Flue Boiler provides our Hot Water system. This is located on the kitchen wall downstairs and is controlled by a Programmer...switching the system on/off twice daily. Life Style Model LP241,
I wish to remove the old Thermostat and replace it with the Wireless System. (What happens to the thermostat wiring?)

The wiring instruction for the Wireless System states: -
The SCR should be wired to the Combi boiler or central heating wiring using the correct type of cable or flex. The SCR should be wired in to replace hard-wired room thermostats.

The Glow Worm wiring block reads from left to right:- (7)

Lp =LIVE – (Permanent) Ls =LIVE – (Switched) N = NEUTRAL

EARTH MAIN EARTH PUMP - Pl = PUMP LIVE - Pn= PUMP NEUTRAL

Any help or suggestions would be gratefully received.

Regards
Robert Maitland