 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Dismantle Mixer tap.
Actually not as drastic as it sounds. Basically the tap is the wrong way
round, so the hot is could and cold is hot. I'd like to swap the crowns (Don't know the correct term - the parts you turn) around. This is the tap; http://www.focusdiy.co.uk/invt/24468 There is no visable screw to slacken. The barrels do unscrew, but its still not clear to me as to how to go about it. Does anyone here know? TIA Patrick |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Thermostatic shower mixer and diverter to bath/showerhead | UK diy | |||
| bath/shower mixer taps | UK diy | |||
| Gravity fed Shower mixer ; cold from mains, hot from cylinder tank | UK diy | |||
| Pre-cancelling mixer products (DAC sample selection) | Electronics | |||
| Advice on which shower mixer? | UK diy | |||
Threaded Mode
