Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Draining unvented system
I want to tap into the cold water main to take a feed for a new electric
shower. The house has an unvented hot water system (Megaflo type). Are there any special things to do/be aware of before I shut off the main stop cock and drain the system/refill afterwards? Many thanks in advance. |
#2
|
|||
|
|||
Draining unvented system
"DKSanders" wrote in message ... I want to tap into the cold water main to take a feed for a new electric shower. The house has an unvented hot water system (Megaflo type). Are there any special things to do/be aware of before I shut off the main stop cock and drain the system/refill afterwards? Many thanks in advance. Just make sure you've turned everything "OFF" before you do the job. Then make sure you turn everything back "ON" and check for leaks when you're done. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Draining CH System (again) | UK diy | |||
Water system problem | UK diy | |||
Unvented HW & CH System Questions | UK diy | |||
mains Hot water, and do I convert open heating to a closed heating system | UK diy | |||
Trying to understand my plumbing system | UK diy |