Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#8
![]() |
|||
|
|||
![]()
Andy Hall wrote:
On 15 Aug 2005 07:18:33 -0700, "Nottingham Jon" wrote: dg Thanks, dg. I haven't discussed it with the neighbours but, to be honest, I wouldn't want to make them get a plumber in to move the outlet - there isn't really an obvious alternative location without completely resiting the boiler. I wondered if there was any kind of deflector/bend/anything which could be fitted to the flue to prevent the fan from blowing the exhaust into my yard quite so vigorously. The same outlet was never a problem when it was an old-style naturally-aspirated flue. I could put up a fairly small perspex screen at the boundary to deflect the flow, but it seems rather cumbersome. Any other suggestions anyone? Depending on the boiler, there may be a couple of options: - Some boilers can have a flue type consisting of a pair of 50mm mUPVC plastic pipes (like plastic waste pipe) which can be routed separately if necessary and over several metres (20 in some cases). This could enable the flue to be routed to a different part of the building without moving the boiler. The inlet often doesn't have to be in the same place as the outlet. Here's an example of a boiler that has this. Quite a number of other manufacturers do this as an option. http://www.keston.co.uk/downloads/pdf/cel25-b.pdf - For boilers with concentric flue, the manufacturer may make additional components that would allow the flue to be run up the wall slightly and/or to direct the plume up at an angle. For example, look at www.worcester-bosch.co.uk and navigate to their product documentation for installers. As an illustration, there is the flue info for the 30CDi which shows a whole variety of fittings and installations that are possible. I would ask the neighbour what the make and model of the boiler is and then perhaps you can work with the installer to come up with a solution. I wouldn't put anything like a deflector close to the flue because this is not an approved method normally and could have adverse and dangerous effects on the flue behaviour -- .andy Thanks Andy, this could be what I'm after. Now I just have to find the right opportunity to talk to the neighbours about it. They are not very friendly at all -not specifically unfriendly, and certainly not unpleasant, but they always seem a bit phased by the concept of speaking to one's neighbours. Even a 'hello' over the fence yields a look of suprise, and sometimes even meets silence. Before you ask, I don't play a lot of loud music, rev the car/bike late at night etc, they just aren't friendly types. Cheers for the info, Jon. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Non-modulating condensing boilers? | UK diy | |||
New condensing boiler installation - truth or lies | UK diy | |||
Heat banks (again!) | UK diy | |||
Condensing Boiler problems | UK diy | |||
New Condensing Boiler and Shower | UK diy |