Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
re drilling advice
brilliant response group - thank you all.
It appears my drill is in reverse! I cannot believe I was so stupid, but pleased to know so many of you have been there yourselves! I feel like a new member of a privelaged few! Meantime have also replaced the old 'self reversing!!' drill with an SDS that so many of you raved about! Ian |
#2
|
|||
|
|||
Ian Hooksem wrote:
brilliant response group - thank you all. It appears my drill is in reverse! I cannot believe I was so stupid, but pleased to know so many of you have been there yourselves! I feel like a new member of a privelaged few! Meantime have also replaced the old 'self reversing!!' drill with an SDS that so many of you raved about! Ian hehe. Reckon thats one we've all done some time. NT |
#3
|
|||
|
|||
In article .com,
wrote: Meantime have also replaced the old 'self reversing!!' drill with an SDS that so many of you raved about! Ian hehe. Reckon thats one we've all done some time. Luckily, the only reversing mains hammer drill I have is an old B&D Tradesman which only uses the minimum speed in reverse as it's for removing screws. -- *A day without sunshine is like... night. Dave Plowman London SW To e-mail, change noise into sound. |
#4
|
|||
|
|||
Ian Hooksem wrote:
brilliant response group - thank you all. It appears my drill is in reverse! I cannot believe I was so stupid, but pleased to know so many of you have been there yourselves! I feel like a new member of a privelaged few! Meantime have also replaced the old 'self reversing!!' drill with an SDS that so many of you raved about! Good to hear it, but..... self reversing? Have you perhaps swapped the pos & neg in the plug, or in a mains wiring circuit? |
#5
|
|||
|
|||
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Advice sought on drilling | Woodworking | |||
Cutback on plywood and new vinyl tile, need advice. | Home Repair | |||
Where to get advice about old timber framed buildings? Longish | UK diy | |||
Drilling metal control panel advice... | Metalworking |