UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Mark Watson
 
Posts: n/a
Default Advice on Steels


Howdy


I'm mulling over doing some work at the back of the house. It's 100yr
old, and a wall has already been taken down between what was the
'breakfast room' and the kitchen as is often the case with this kind
of house.

http://www.bestsf.net/images/100_1373.JPG for a piccie. The idea is
that the wall with the 2x doors is knocked down and a steel put in
place. The wall between what is now the toilet and the utility room
will come down (it's not brick, so obviously isn't supporting).

The sink will move into the karzi, so that we will have a clear bit of
space leading to what is currently a back window. This back window
will be replaced by a big set of doors that will a) lead out into the
conservatory(more of a lean to) and b) get in a lot of light and let
us see the garden from the kitchen.

The back window is pictures at
http://www.bestsf.net/images/100_1374.jpg

My questions are

- any rough estimates on the size of the steel needed to replace the
wall, and the likely cost of putting it in? The wall rises up through
the first floor (not unsurprisingly) to the loft.
- will I need a steel to go over the doors which will replace the back
window, and a guide to the cost?

Thanks in anticipation

mark Watson



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cutback on plywood and new vinyl tile, need advice. statepenn99 Home Repair 1 March 12th 05 05:56 PM
Risk Management/Shop Safety and Advice (long) charlie b Woodworking 8 June 9th 04 09:51 PM
Newbie to Veneering Needs Advice Jack Schumacher Woodworking 6 June 9th 04 07:39 PM
Taking down a timber frame - need advice L Bargstedt Woodworking 6 August 12th 03 08:07 AM
Knife Steel FAQ updated Gunner Metalworking 9 June 26th 03 11:11 PM


All times are GMT +1. The time now is 07:27 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"