Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Removing glass from UPVC window frame
How do i remove the glass from a upvc window frame. I have some sort
of plastic beading with rubber touching the glass around the frame on the inside but not sure how to remove this beading. Will the glass then just pop out? Thanks in advance |
#2
|
|||
|
|||
Removing glass from UPVC window frame
"Shabs" wrote in message m... How do i remove the glass from a upvc window frame. I have some sort of plastic beading with rubber touching the glass around the frame on the inside but not sure how to remove this beading. Will the glass then just pop out? Thanks in advance Usually the plastic trim can be coaxed out with a thin, flat tool, then the glass panel comes out. ----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeed.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =--- |
#3
|
|||
|
|||
Removing glass from UPVC window frame
"Shabs" wrote in message
m... How do i remove the glass from a upvc window frame. I have some sort of plastic beading with rubber touching the glass around the frame on the inside but not sure how to remove this beading. Will the glass then just pop out? Is there a window that you can experiment with that's perhaps behind blinds etc? As yours has the beading on the inside it may just be the reverse of what I'm saying below, but it could be totally different! On ours, the beveled plastic beading is on the outside and the outside rubber seal slides into this, so doesn't just pull the seal off. What you do is remove the inside rubber seal - just a matter of grabbing it with some thin pliers - and remove the seal on all sides. This leaves a small gap so from the outside you can then push the sealed unit inwards so that it moves away from the outer seal. There's then (suppossed to be) enough clearance for the plastic beading to snap off - it's always a bit awkward but you push it in on the edge adjacent to the frame with your thumbs and it should push off. Once you get one off you can see how it works and maybe figure a better way of doing it. I've had to resort to a rubber mallet and wooden wedges to prise some of them off. HTH |
#4
|
|||
|
|||
Removing glass from UPVC window frame
Shabs wrote:
How do i remove the glass from a upvc window frame. I have some sort of plastic beading with rubber touching the glass around the frame on the inside but not sure how to remove this beading. Will the glass then just pop out? If you can't work it out quickly, a brick will remove the glass quite rapidly, and then you can work out what you should have done. |
#5
|
|||
|
|||
Removing glass from UPVC window frame
How do i remove the glass from a upvc window frame. I have some sort
of plastic beading with rubber touching the glass around the frame on the inside but not sure how to remove this beading. Will the glass then just pop out? It depends on a few things, as others have mentioned - something else as well though - ours is externally glazed, and the beads are also outside. There are metal retainers holding the panes in place once all the beads are off. I`m not sure how to get them off, but you might come across something similar... -- Please add "[newsgroup]" in the subject of any personal replies via email --- My new email address has "ngspamtrap" & @btinternet.com in it ;-) --- |
#6
|
|||
|
|||
Removing glass from UPVC window frame
"Shabs" wrote in message
m How do i remove the glass from a upvc window frame. I have some sort of plastic beading with rubber touching the glass around the frame on the inside but not sure how to remove this beading. Will the glass then just pop out? Thanks in advance Cut your possible losses. Look up your local window installers. All companies use different methods. A new sealed unit will cost you, and if you damage the frame (easy to do) it will not endear you to HHMBO! -- Posted via Mailgate.ORG Server - http://www.Mailgate.ORG |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
maximum width of top hung upvc casement window without a centre support | UK diy | |||
Sizing up window aperture for UPVC double glazing | UK diy | |||
uPVC window as bespoke shower panel?! | UK diy | |||
Safe glass removal from victorian sash window? | UK diy |