Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
VFD problem
I need help connecting my VFD to a motor.
I connected my VFD (KBAC-27D) to single phase 240V VFD shows code "Undervoltage" I measured voltage between AC lines - 237V, between one AC line and ground - 117V another AC line and ground 117V It's a little less than suppose to be but should be OK I guess. Can anyone shed some light on this problem? Thanks, Alex |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sony TV - Picture Problem | Electronics Repair | |||
Hot water furnace problem. | Home Ownership | |||
SONY 35" Dual PIP -Video Blackout Problem | Electronics Repair | |||
Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |