Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
1-10 -> 2¼-8 adapter, anyone?
I have this gizmo I'm never ever ever going to use. I don't know
where I got it. It threads onto a 1-10 spindle nose and is threaded for 2¼-8 threads. Nicely made and finished. Will fit onto the spindle nose of some Atlas 6" lathes and some 4" dividing head spindles, if you happen to have a 2¼-8 threaded lathe chuck you're trying to mate with it. I'm looking for a good home for it. Offer me anything I can use and pay for shipping and it's yours. I can use lots of things, but tops on my list right now (in that price range) is a 1/2-20 die either 1" or 7/8" in diameter, can't find mine if I ever had one. Or a handful of miscellaneous brass/bronze plumbing bits (1/8"? 1/4"? 3/8"?) or anything else you can dream up. Or $15. This would take a skilled machinist at least two hours to make on a lathe and it would take me all friggin day. GWE W. Washington |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Stuck 2-3 Morse taper adapter | Woodturning | |||
Phone a/c power source adapter | Electronics Repair | |||
AC Adapter | Electronics Repair | |||
Morse Taper Adapter Issue | Woodturning | |||
Help with collet adapter for Logan lathe? | Metalworking |