In article ,
Grant Erwin wrote:
I have this gizmo I'm never ever ever going to use. I don't know
where I got it. It threads onto a 1-10 spindle nose and is threaded
for 2¼-8 threads. Nicely made and finished. Will fit onto the spindle
nose of some Atlas 6" lathes and some 4" dividing head spindles, if
you happen to have a 2¼-8 threaded lathe chuck you're trying to mate
with it.

Well ... I *do* have a 6" Atlas/Craftsman, and I *do* have a
couple of lathe chucks which have 2-1/4"x8 mounts (left over from when I
converted my 12x24" Clausing to L-00 spindle nose), but I don't think
that those chucks would clear the way on that little 6". :-)

I hope that you find a home for it.

Good Luck,
DoN.

--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---