Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Oil Feed Drill Question
For the drills with the oil feed holes parallel to the shank, which run from
one end of the drill to the other, is a different bushing made for every diameter of drill? Also, is the oil fed under pressure? I was contemplating settting up something to use oil-fed drills in the tailstock of my lathe. I'm finding a lot of stuff about the drill bits themselves, but not much on the equipment needed to run them. TIA. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Building a Mag Drill | Metalworking | |||
Question regarding Grizzly Drill | Woodworking | |||
Buying a new drill | UK diy | |||
Is Drill Doctor worth the price???? | Metalworking | |||
Another toolkit question | UK diy |