 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
FS - Large endmills for sale ( at least too large for my use)
I was at a tool auction, and ended up buying a box of endmills. After sorting out what I can use in my mill...I still have a bunch of stuff that you guys might want... Let me know if you are interested...I can send pictures. After a couple weeks, whatever is left will end up on Ebay... Here is the list... Niagra Roughing endmill 6 flute 11/4 Shank 1 13/16 diameter 6 3/8 L TI coated - used Weldon Stub Arbor 1 1/4" shank - new Weldon endmill 7/8 shank 2 flute 1 1/4 diameter - new ( 3 of them) Niagra Cobalt 6 flute rouphing endmill 1 1/4 shank 1 1/4 diameter 8.5 long - new Niagra endmill 1" shank 4 flute 5.5 long - used Niagra endmill 1.5 shank 4 flute 1.750 dia. 5.5 long - used Quinco endmill 1" shank 1 1/8 diam. 2 flute 4.750 long - new Quinco endmill 1" shank 1" diam. 2 flute 4.750 long - new Niagra endmill 1" shank 1" diam. 2 flute 4.5 long - New Niagra endmill 1" shank 1 1/4" diam. 2 flute 4.5 long TI coated- New Unknown endmill 1.5" shank 2" diameter 2 flute TI coated - Used Niagra endmill 1" shank 1.5" diameter 2 flute - new Valenite Index endmills 2 flute 1.250 shank S-VMSP-125R - 90CC Used S-VMSP-150R - 90CC Used (2 of them) Niagra 6 x 1/2 staggard tooth side mill cutter 1.250 hole - Used (2 of them) |
|
#2
|
|||
|
|||
|
In article .com,
wrote: I was at a tool auction, and ended up buying a box of endmills. After sorting out what I can use in my mill...I still have a bunch of stuff that you guys might want... Let me know if you are interested...I can send pictures. After a couple weeks, whatever is left will end up on Ebay... Here is the list... Niagra Roughing endmill 6 flute 11/4 Shank 1 13/16 diameter 6 3/8 L TI coated - used Hmm ... do you mean: Niagra Roughing endmill 6 flute 1-1/4 Shank 1-13/16 diameter 6 3/8 L ^ ^ TI coated - used The description as shown is a bit confusing. Anyway -- if it is that size, I can't handle it. And as for the rest -- the usual question is "where are you located"? (We don't need the street address, but the nearest big city, state, and country would help. Afterall yahoo has users from all over. Good luck, DoN. -- Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
|
#3
|
|||
|
|||
|
I am in Denver...sorry for the formatting and confusion.
|
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| for Sale Large SPINDLE Adaptor and Large 3C Collet for S/Bend LATHE | Metalworking | |||
| Speedfit technique | UK diy | |||
| A challenge for old house lovers | UK diy | |||
| Copying a large document | UK diy | |||
| brass brazing with a large propane torch | Metalworking | |||
Linear Mode
