 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Idea #123, 342
I was drooling through the Eastwood catalog and noticed they sell a
pressure sandblaster. From looking at it, it seems that it would be very easy to get two or three propane cylinders and make the conversion into one, or convert a tall one. Theirs had the fill valve at the top, in a concave top, which would be just the top cut off and flipped over. Thoughts? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Erector set tool idea | Metalworking | |||
| fantastic gift idea this season | Home Ownership | |||
| Powdercoating panel seaming idea. | Metalworking | |||
| Why is this a bad idea? | UK diy | |||
| Solar space heating idea | UK diy | |||
Threaded Mode
