Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Setting up slitting saw for round stock?
Is there a "kink" for setting up a slitting saw to saw through
round bar stock along the axis, so that the slot is exactly across a diameter? (I presume this to be a similar problem to setting up accurately for cross-drilling) This is actually a Ham Radio application; I wish to make up some very large banana-type plugs from the 1/4" round bar stock that I have in small quantities. For this, I will need to saw two diameters in a cross shape, and then splay out the leaves slightly to make a springy and rubbing contact. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
1" wide 1/4" thick Al flat stock rolling bender project? | Metalworking | |||
Woodhaven's stock sizer | Woodworking | |||
Slitting machine, Slitting, Rolling mill, Wire Flattening Mill, Sheet Leveler, Section Leveler, Scalping Machine, Brush Machine, coiler, decoiler, recoiler, 4 Hi, 6 Hi, 4 High, 6 High, Rolling mill, Wire Flattening Mill, Polishing Machine, Rewinding | Metalworking | |||
Toronto area lumber? | Woodworking | |||
Way off topic, t.v setting | Home Repair |