Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
need EMCO F1 CNC mill manual
Does anyone know where these are available...cheap? I have 2 actually,
one is for the Compact 5, the one that says "BASIS" though I think is for the F1. Put it this way, I don't have anything in the way of a technical manual (drawings, etc.). Specifically for the F1. Thanks a bunch. |
#2
|
|||
|
|||
In article .com,
Chris wrote: Does anyone know where these are available...cheap? I have 2 actually, one is for the Compact 5, the one that says "BASIS" though I think is for the F1. The "BASIS" one is a training manual, not a programming manual or a maintenance manual. Put it this way, I don't have anything in the way of a technical manual (drawings, etc.). Specifically for the F1. Thanks a bunch. The technical manual for the Compact-5/CNC and for the F1 are combined into a single book. I've scanned the programming manual for the Compact-5/CNC, but I don't have a scanner big enough to scan the whole of the technical manual, because some of the pages are three or four section foldouts containing schematics. Good Luck, DoN. -- Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
#3
|
|||
|
|||
join compact5 group on yahoo (or whatever the group is called).
The files section has tech manual which contains essential stuff for both F1 and CNC5. Not schematics, of course, but most of us have upgraded to something more modern by now... / mark DoN. Nichols wrote: In article .com, Chris wrote: Does anyone know where these are available...cheap? I have 2 actually, one is for the Compact 5, the one that says "BASIS" though I think is for the F1. The "BASIS" one is a training manual, not a programming manual or a maintenance manual. Put it this way, I don't have anything in the way of a technical manual (drawings, etc.). Specifically for the F1. Thanks a bunch. The technical manual for the Compact-5/CNC and for the F1 are combined into a single book. I've scanned the programming manual for the Compact-5/CNC, but I don't have a scanner big enough to scan the whole of the technical manual, because some of the pages are three or four section foldouts containing schematics. Good Luck, DoN. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
(mis)adventures moving a Nichols mill | Metalworking | |||
need owners manual for a mill and a lathe | Metalworking | |||
EMCO V10 lathes for sale | Metalworking | |||
Pratt & Whitney bench mill owners manual? | Metalworking | |||
Manual for a Shizuoka AN-S mill needed | Metalworking |