Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
what diameter should the bearing be for a .689 dia hole?
I'm trying to build something from a set of plans and it shows small
flange bearings installed in a .689" hole. the shaft is 1/4". Looking about I found flanged bearings that are .625 dia and .75 diameter. what size bearing should I use in this instance? should I use a different hole size for a better fit? In general how much clearance should a person allow for a snug fit bearing? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How to measure really small hole diameter | Metalworking | |||
2" hole in a 3x2x1/8 rectangular tube | Metalworking | |||
Jacobs Chuck on Jet Mini Lathe | Woodturning | |||
Basics on Depth of Cuts | Metalworking |