Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Sheldon tailstock problems
I have a similar problem as mentioned in an earlier post. The nib the that
sticks up into the bore of my tailstock and keeps the barral from rotating is all but worn away. Been considering how to tackle a repair. Been thinking of cutting a notch in the front edge of the tailstock and brazing in a new nib to fit the groove in the barrel. Any of you ever do this repair? I've always wondered how the origional was made because the barrel could not be bore with this nib in place and there is no sign that it is replaceable. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Fixing Problems on Minolta EP 8015 Copier | Electronics Repair | |||
Gateway EV700 problems | Electronics Repair | |||
Magnavox rear projection TV RK8530AK02 - startup problems | Electronics Repair | |||
Zenith TV problems | Electronics Repair | |||
Tiling Shower Area - adhesive spreading and tile cutting problems | UK diy |