Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Cast aluminium repair
Hi , Need advice on a grade of aluminium suitable for thread tapping and
welding (tig) to a damaged cast ally dirt/bike clutch hub. Thanks. |
#2
|
|||
|
|||
In article , Dennis
wrote: Hi , Need advice on a grade of aluminium suitable for thread tapping and welding (tig) to a damaged cast ally dirt/bike clutch hub. Thanks. 4047 filler rod will help with the cast aluminum. 6061 will be fine for the drilling and tapping. |
#3
|
|||
|
|||
Thanks Ernie.
"Ernie Leimkuhler" wrote in message ... In article , Dennis wrote: Hi , Need advice on a grade of aluminium suitable for thread tapping and welding (tig) to a damaged cast ally dirt/bike clutch hub. Thanks. 4047 filler rod will help with the cast aluminum. 6061 will be fine for the drilling and tapping. |
#4
|
|||
|
|||
I second that motion 4047,
Cya "Dennis" wrote in message ... Hi , Need advice on a grade of aluminium suitable for thread tapping and welding (tig) to a damaged cast ally dirt/bike clutch hub. Thanks. |
#5
|
|||
|
|||
For welding A356 cast my vote goes to 4008. Bit pricy
though. Phil "Chris" wrote in message ... I second that motion 4047, Cya "Dennis" wrote in message Hi , Need advice on a grade of aluminium suitable for thread tapping and welding (tig) to a damaged cast ally dirt/bike clutch hub. Thanks. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Question shet metal repair | Metalworking | |||
Wrought Iron, Cast Alum and Cast Iron Decorative welding | Metalworking | |||
How to repair an UFO? | Electronics Repair |