 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
best method for cutting 3/4" aluminum tubing?
hi,
I am using 3/4" OD aluminum tubing as balusters for deck rails. I need to cut almost 400 of them to length. I was hoping for suggestions on the most efficient and painless way to do this. I have woodworking tools such as band saw, table saw, miter saws, jig saw, etc... any advice appreciated... thanks, david greenville, sc |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Soldering aluminum tubing to steel sheet metal | Metalworking | |||
| Aluminum tubing | Metalworking | |||
| Too Much Flex in Aluminum Tubing | Metalworking | |||
| Putting an arc in aluminum tubing | Metalworking | |||
| on a side note: Putting a bend in 6061 aluminum tubing | Metalworking | |||
Threaded Mode
