Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Aluminum tubing
On Thu, 20 Nov 2003 07:51:18 GMT, Strider wrote:
Does anyone know where I can order aluminum tubing over the net? I need small quantities, about 1" in diameter X 60" long to manufacture walking staffs. This would be a low volume purchase so I can't be looking at the bulk warehouses. Thanks in advance, Strider Ask over on rec.crafts.metalworking. There are a number of such sources on the net. I would also suggest Easton, the maker of baseball bats, arrow and golf club shafts, etc etc. You will also need to state what wall thickness you need, or ask for suggestions. There are a number of very good material specialists there. Gunner Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem. |
#2
|
|||
|
|||
Aluminum tubing
On Thu, 20 Nov 2003 10:19:42 GMT, Gunner
wrote: On Thu, 20 Nov 2003 07:51:18 GMT, Strider wrote: Does anyone know where I can order aluminum tubing over the net? I need small quantities, about 1" in diameter X 60" long to manufacture walking staffs. This would be a low volume purchase so I can't be looking at the bulk warehouses. Thanks in advance, Strider Ask over on rec.crafts.metalworking. There are a number of such sources on the net. I would also suggest Easton, the maker of baseball bats, arrow and golf club shafts, etc etc. You will also need to state what wall thickness you need, or ask for suggestions. There are a number of very good material specialists there. Gunner Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem. Thanks. Strider |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Too Much Flex in Aluminum Tubing | Metalworking | |||
Welding Aluminum (WAS: Welding Magnesium) | Metalworking | |||
Putting an arc in aluminum tubing | Metalworking | |||
on a side note: Putting a bend in 6061 aluminum tubing | Metalworking |