Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
FA: Lincoln/Harris Torch Set
I recently picked up a Lincoln/Harris torch set at an auction because the
mixer in my victor has gone bad. Before I hooked it up I ran into a deal on a larger Harris cutting torch so I don't need this one after all. The auction where I purchased it was for store returns and closeouts and I believe this set was from a Sears store. It's missing the brazing/welding head & tips but the cutting head is there. There also is not a cutting tip but it looks complete otherwise. It includes 2 regulators, torch body & cutting head, hoses, striker and goggles. http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3836086478 Best Regards, Keith Marshall "Even if you are on the right track, you'll get run over if you just sit there." - Will Rogers (1879-1935). |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Propane Torch problems - Bernzomatic etc | Metalworking | |||
Tig torch questions | Metalworking |