 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
simple way to bend sheet metal?
Hi all,
I need to bench a 4x10 piece of .032 aluminum in two points along its length, both at 90 degree angles. I've never worked with metal before so I just want to make sure, is there an easy, safe way to do this? I don't want to ruin a $30 piece of metal. Thanks. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Sheet metal screw suppliers. | UK diy | |||
| Sheet Metal project price question. | Metalworking | |||
| Sheet metal brake plans? | Metalworking | |||
| bending sheet metal into a cylinder | Metalworking | |||
Threaded Mode
