Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
faulty injector pump
Toyota coaster year 2000 HZB501hz motor bus wont pull uphill runs ok on flat
road checked tank for water ,blocked pick up put new fuel filter in checked for cracked lines have got it to pull up hill by installing electric fuel pump but these buses dont have a fuel pump ,so my question is will i damage anything by leaving it on there -- for full context, visit https://www.polytechforum.com/metalw...mp-647797-.htm |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
cav injector pump JCB 3cx | Metalworking | |||
Injector Pump banging | Home Ownership | |||
1960's Mattel Injector - resin used? | Metalworking | |||
DIY injector type vacuum pump: Plan, photos and experiences | Metalworking | |||
Baxi Injector T in wrong orientation | UK diy |