Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Making a 16-cyl Stirling engine
This is an especially nice video of machining and running a
16-cylinder Stirling engine. There's lots of very small-scale CNC turning and boring, and a little 3D printing. The finished engine, if you like Stirlings, is 'way cool. https://www.youtube.com/watch?v=nSE3...s_digest-vrecs -- Ed Huntress |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Making a 16-cyl Stirling engine
Nice.
On 1/13/2018 10:46 PM, Ed Huntress wrote: This is an especially nice video of machining and running a 16-cylinder Stirling engine. There's lots of very small-scale CNC turning and boring, and a little 3D printing. The finished engine, if you like Stirlings, is 'way cool. https://www.youtube.com/watch?v=nSE3...s_digest-vrecs |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Stirling engine runs on coffee | Woodworking | |||
Solar powered stirling engine project | Woodworking | |||
Stirling Engine Manual Volume 1 by James Rizzo | Metalworking | |||
ltd Stirling engine | UK diy | |||
Uvented cyl v Thermal store. | UK diy |