Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
water pipe vs DOM
I've got a project where i need over a hundred feet of 1.38 ID by
1.625 OD DOM tubing. Turns out this is almost exactly the same size as 1 1/4 water pipe, MUCH less expenisve. Need to do a lot of machining and some bending of a small tab. Will water pipe work as well? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
continuing knocking sound in water pipe half an hour after all water off | Home Repair | |||
Water and sewer bills dependent on water supply pipe diameter | Home Repair | |||
Leaking Pipe - need to drain water.(GCH pipe) need some advice. | UK diy | |||
Reducing 12mm water pipe to a 6mm pipe | UK diy | |||
Pipe run between Cold water tank and hot water cylinder. | UK diy |