 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Best epoxy for adhesion?
I'm repairing an crank handle for a nice old tripod. The handle is made
of some sort of black plastic, and the bit made to repair (reinforce across the break) it is steel. The steel bit sits inside the u-shaped channel of the plastic. I expect there is a bit of draft so the epoxy I'm planing on using to embed the steel bit has to stick good to that plastic. Recommendations? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Epoxy Paint or Epoxy Coating; Do you Know the Difference? | Home Repair | |||
| mortar with stronger adhesion | UK diy | |||
| Exterior paintwork adhesion | UK diy | |||
| paving slab adhesion | UK diy | |||
| Does fresh epoxy stick to dried epoxy? | Woodworking | |||
![unk[_2_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
