I'd like to hire somebody that can get to southern Cal. to see that
this item is properly crated to ship to MN
http://www.ebay.com/itm/CNC-Shizouka...:X:RTQ:US:1123

Gunner, are you interested? email me
karltownsendATembarqmailDOTcom

Karl

On Thu, 10 Sep 2015 12:02:25 -0500, Karl Townsend
wrote:

I'd like to hire somebody that can get to southern Cal. to see that
this item is properly crated to ship to MN
http://www.ebay.com/itm/CNC-Shizouka...:X:RTQ:US:1123

Gunner, are you interested? email me
karltownsendATembarqmailDOTcom

Karl

Karl..its 248 miles, one way, from my home to Santee, California..or
nearly 600 miles round trip. Whats it worth to you for me to spend
(2) days checking on the shipping of this $500 mill? half a day
driving down, checking on how they are going to close it up...and
another .5-1 day driving back?

Btw...did you see these mills I have available?

https://picasaweb.google.com/1040422...97654969568642

https://picasaweb.google.com/1040422...97703811047058

Both of course are Sharnoa. Both have their controls. Both are
reputed to run fine, but need keyboards. Everything I moved out of
that shop was in good running order.

These allegedly were rebuilt but never used and there are keyboards
supposedly available from the tech that redid the electronics..but
never returned the keyboards. Both have servos and not..not steppers.

Gunner

On Thu, 10 Sep 2015 10:35:41 -0700, Gunner Asch
wrote:

On Thu, 10 Sep 2015 12:02:25 -0500, Karl Townsend
wrote:

I'd like to hire somebody that can get to southern Cal. to see that
this item is properly crated to ship to MN
http://www.ebay.com/itm/CNC-Shizouka...:X:RTQ:US:1123

Gunner, are you interested? email me
karltownsendATembarqmailDOTcom

Karl

Karl..its 248 miles, one way, from my home to Santee, California..or
nearly 600 miles round trip. Whats it worth to you for me to spend
(2) days checking on the shipping of this $500 mill? half a day
driving down, checking on how they are going to close it up...and
another .5-1 day driving back?

Btw...did you see these mills I have available?

https://picasaweb.google.com/1040422...97654969568642

https://picasaweb.google.com/1040422...97703811047058

Both of course are Sharnoa. Both have their controls. Both are
reputed to run fine, but need keyboards. Everything I moved out of
that shop was in good running order.

These allegedly were rebuilt but never used and there are keyboards
supposedly available from the tech that redid the electronics..but
never returned the keyboards. Both have servos and not..not steppers.

Gunner

Oh..both will come with a fair amount of tooling as well. Not sure
about vises.. I cant remember how many I loaded and moved..but there
is a ****LOAD of 40 taper tooling the owner will throw in.

Gunner

On Thu, 10 Sep 2015 10:38:46 -0700, Gunner Asch
wrote:

On Thu, 10 Sep 2015 10:35:41 -0700, Gunner Asch
wrote:

On Thu, 10 Sep 2015 12:02:25 -0500, Karl Townsend
wrote:

I'd like to hire somebody that can get to southern Cal. to see that
this item is properly crated to ship to MN
http://www.ebay.com/itm/CNC-Shizouka...:X:RTQ:US:1123

Gunner, are you interested? email me
karltownsendATembarqmailDOTcom

Karl

Karl..its 248 miles, one way, from my home to Santee, California..or
nearly 600 miles round trip. Whats it worth to you for me to spend
(2) days checking on the shipping of this $500 mill? half a day
driving down, checking on how they are going to close it up...and
another .5-1 day driving back?

Btw...did you see these mills I have available?

https://picasaweb.google.com/1040422...97654969568642

https://picasaweb.google.com/1040422...97703811047058

Both of course are Sharnoa. Both have their controls. Both are
reputed to run fine, but need keyboards. Everything I moved out of
that shop was in good running order.

These allegedly were rebuilt but never used and there are keyboards
supposedly available from the tech that redid the electronics..but
never returned the keyboards. Both have servos and not..not steppers.

Gunner

Oh..both will come with a fair amount of tooling as well. Not sure
about vises.. I cant remember how many I loaded and moved..but there
is a ****LOAD of 40 taper tooling the owner will throw in.

Gunner




My phone number is 805-732-5308. Feel free to call me between 8am-10pm
7 days a week.

Gunner

SORRY,

I though you were A LOT closer.

You may or may not know, I refit controls to old CNC machines as a
very serious hobby. I'm locked into NMTB40 tooling, don't want to
change that horse at this point in my life.

This machine includes an NMTB40 tool changer. As common as hen's
teeth.

Karl

On Thu, 10 Sep 2015 15:52:43 -0500, Karl Townsend
wrote:

SORRY,

Chuckle..not a problem. Most folks dont understand just how big
California (and Texas) actually are.

I though you were A LOT closer.

At the southernmost part of my normal service range..Im 85ish miles to
the north of Diego..and I only hit that one client once a year or so.

You may or may not know, I refit controls to old CNC machines as a
very serious hobby. I'm locked into NMTB40 tooling, don't want to
change that horse at this point in my life.

Nope..didnt know that. Then you would like those two mills that I
posted. One has a NMTB40 tool changer..Im not sure about the other.

$2k..your choice.

This machine includes an NMTB40 tool changer. As common as hen's
teeth.

Karl

Indeed they are rare.

Gunner