PING Gunner
 

I'd like to hire somebody that can get to southern Cal. to see that
this item is properly crated to ship to MN
http://www.ebay.com/itm/CNC-Shizouka...:X:RTQ:US:1123

Gunner, are you interested? email me
karltownsendATembarqmailDOTcom

Karl

PING Gunner
 

On Thu, 10 Sep 2015 12:02:25 -0500, Karl Townsend
wrote:

I'd like to hire somebody that can get to southern Cal. to see that
this item is properly crated to ship to MN
http://www.ebay.com/itm/CNC-Shizouka...:X:RTQ:US:1123

Gunner, are you interested? email me
karltownsendATembarqmailDOTcom

Karl

Karl..its 248 miles, one way, from my home to Santee, California..or
nearly 600 miles round trip. Whats it worth to you for me to spend
(2) days checking on the shipping of this $500 mill? half a day
driving down, checking on how they are going to close it up...and
another .5-1 day driving back?

Btw...did you see these mills I have available?

https://picasaweb.google.com/1040422...97654969568642

https://picasaweb.google.com/1040422...97703811047058

Both of course are Sharnoa. Both have their controls. Both are
reputed to run fine, but need keyboards. Everything I moved out of
that shop was in good running order.

These allegedly were rebuilt but never used and there are keyboards
supposedly available from the tech that redid the electronics..but
never returned the keyboards. Both have servos and not..not steppers.

Gunner

PING Gunner
 

On Thu, 10 Sep 2015 10:35:41 -0700, Gunner Asch
wrote:

On Thu, 10 Sep 2015 12:02:25 -0500, Karl Townsend
wrote:

I'd like to hire somebody that can get to southern Cal. to see that
this item is properly crated to ship to MN
http://www.ebay.com/itm/CNC-Shizouka...:X:RTQ:US:1123

Gunner, are you interested? email me
karltownsendATembarqmailDOTcom

Karl

Karl..its 248 miles, one way, from my home to Santee, California..or
nearly 600 miles round trip. Whats it worth to you for me to spend
(2) days checking on the shipping of this $500 mill? half a day
driving down, checking on how they are going to close it up...and
another .5-1 day driving back?

Btw...did you see these mills I have available?

https://picasaweb.google.com/1040422...97654969568642

https://picasaweb.google.com/1040422...97703811047058

Both of course are Sharnoa. Both have their controls. Both are
reputed to run fine, but need keyboards. Everything I moved out of
that shop was in good running order.

These allegedly were rebuilt but never used and there are keyboards
supposedly available from the tech that redid the electronics..but
never returned the keyboards. Both have servos and not..not steppers.

Gunner

Oh..both will come with a fair amount of tooling as well. Not sure
about vises.. I cant remember how many I loaded and moved..but there
is a ****LOAD of 40 taper tooling the owner will throw in.

Gunner

PING Gunner
 

On Thu, 10 Sep 2015 10:38:46 -0700, Gunner Asch
wrote:

On Thu, 10 Sep 2015 10:35:41 -0700, Gunner Asch
wrote:

On Thu, 10 Sep 2015 12:02:25 -0500, Karl Townsend
wrote:

I'd like to hire somebody that can get to southern Cal. to see that
this item is properly crated to ship to MN
http://www.ebay.com/itm/CNC-Shizouka...:X:RTQ:US:1123

Gunner, are you interested? email me
karltownsendATembarqmailDOTcom

Karl

Karl..its 248 miles, one way, from my home to Santee, California..or
nearly 600 miles round trip. Whats it worth to you for me to spend
(2) days checking on the shipping of this $500 mill? half a day
driving down, checking on how they are going to close it up...and
another .5-1 day driving back?

Btw...did you see these mills I have available?

https://picasaweb.google.com/1040422...97654969568642

https://picasaweb.google.com/1040422...97703811047058

Both of course are Sharnoa. Both have their controls. Both are
reputed to run fine, but need keyboards. Everything I moved out of
that shop was in good running order.

These allegedly were rebuilt but never used and there are keyboards
supposedly available from the tech that redid the electronics..but
never returned the keyboards. Both have servos and not..not steppers.

Gunner

Oh..both will come with a fair amount of tooling as well. Not sure
about vises.. I cant remember how many I loaded and moved..but there
is a ****LOAD of 40 taper tooling the owner will throw in.

Gunner




My phone number is 805-732-5308. Feel free to call me between 8am-10pm
7 days a week.

Gunner

PING Gunner
 

SORRY,

I though you were A LOT closer.

You may or may not know, I refit controls to old CNC machines as a
very serious hobby. I'm locked into NMTB40 tooling, don't want to
change that horse at this point in my life.

This machine includes an NMTB40 tool changer. As common as hen's
teeth.

Karl

PING Gunner
 

On Thu, 10 Sep 2015 15:52:43 -0500, Karl Townsend
wrote:

SORRY,

Chuckle..not a problem. Most folks dont understand just how big
California (and Texas) actually are.

I though you were A LOT closer.

At the southernmost part of my normal service range..Im 85ish miles to
the north of Diego..and I only hit that one client once a year or so.

You may or may not know, I refit controls to old CNC machines as a
very serious hobby. I'm locked into NMTB40 tooling, don't want to
change that horse at this point in my life.

Nope..didnt know that. Then you would like those two mills that I
posted. One has a NMTB40 tool changer..Im not sure about the other.

$2k..your choice.

This machine includes an NMTB40 tool changer. As common as hen's
teeth.

Karl

Indeed they are rare.

Gunner

PING Gunner
 

Nope..didnt know that. Then you would like those two mills that I
posted. One has a NMTB40 tool changer..Im not sure about the other.


I could be VERY interested. Before getting excited I need to see if it
can get into the basement shop space. Needs to go thru a 7' high door
and then run in a room 7' 8" high to floor joists and 8' 4" between
joists.

I know how this "it only needs a minor thing to run" BS goes. I'm
buying it as a dead machine. Most important thing for the refit is the
servo type. Need to know everything you can find on the servos. Look
to see if it has brushes or is brushless.

Karl

PING Gunner
 

On Sat, 12 Sep 2015 01:09:42 -0500, Karl Townsend
wrote:


Nope..didnt know that. Then you would like those two mills that I
posted. One has a NMTB40 tool changer..Im not sure about the other.


I could be VERY interested. Before getting excited I need to see if it
can get into the basement shop space. Needs to go thru a 7' high door
and then run in a room 7' 8" high to floor joists and 8' 4" between
joists.

I know how this "it only needs a minor thing to run" BS goes. I'm
buying it as a dead machine. Most important thing for the refit is the
servo type. Need to know everything you can find on the servos. Look
to see if it has brushes or is brushless.

Karl


Neither machine will fit in a space less than 8' tall. In fact..they
are about ..about 9' tall.

Sorry old friend.

On the other hand...I do know of another machine, with a Fagor control
on it for about the same money that should fit. They stopped using
it when they discovered that their work came out oval while thread
milling..so one ballscrew has excessive backlass for thread milling.
Seems to work fine for linear cuts however.


True Blue Machining
Professional Services
Address: Fullerton, CA 92832
Phone:(714) 255-9015

Ask for John.

It does have a tool changer...but I dont know for sure what tool
holders it uses.

Gunner