Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
We have hard water here, so vinegar is good for cleaning. I soaked our
garden sprayer in vinegar for three days. I suppose the destruction of the metal was the reason there was some reaction causing the vinegar to produce gas. In any case, it appears to have destroyed the threads where the sprayer attaches to the garden hose. The sprayer slips over the male end of the garden hose now, loose. So that's the way it's going to be with any cheap Chinese made garden sprayer? No soakie in vinegar? Do I have to buy one made out of stainless steel if it is to be soaked in vinegar? Or plastic, I guess. What do you think the metal was that disintegrated? Thanks. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
What type of adapter from 1.25 O.D. to Garden hose? Pool Pump No threads | Home Repair | |||
Garden Vinegar vs Roundup | Home Repair | |||
Do they make a tool to clean up threads on a garden hose? | Home Repair | |||
Good quality garden sprayer | Home Repair | |||
garden sprayer won't pump up | Home Repair |