Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Choosing a kitchen faucet
I'm looking for a new kitchen faucet, to replace the mistake I bought a
year ago, that now leaks from a pinhole in the spout (which appears to be die metal). Requirements: Single lever, like original Delta. All water-contact components either brass or stainless steel (excluding seals). This includes the spout. Have a separate side sprayer. (I have a 4-hole stainless steel sink.) Polished chrome finish. Be large enough for the sink, but not huge (like those things used for granite counters). What I've found so far: American Standard "Reliance" model 4205.001.002. Delta model 175-DST. Moen Commercial model 8707 (can be had with 9" or 12" spout, but 12" seems too long). Questions: What experience do people have with these and/or competing faucets? What similar products not listed are there? Joe Gwinn |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Kitchen Faucet | Home Repair | |||
Choosing Beautiful Kitchen Backsplash Tiles | Home Repair | |||
Choosing Beautiful Kitchen Backsplash Tiles | Home Repair | |||
Choosing Kitchen Cabinets | Woodworking | |||
Choosing location for kitchen appliances | UK diy |