Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
I have two cat t150d forklifts. one is great, another is not so great,
it has a weak transmission. with a load on the forks, this forklift cannot go over relatively minor obstacles. What could be a typical troubleshooting procedure for this, what sorts of things typiucally go wrong. thanks a lot |
#2
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On 6/10/2014 4:50 PM, Ignoramus32376 wrote:
I have two cat t150d forklifts. one is great, another is not so great, it has a weak transmission. with a load on the forks, this forklift cannot go over relatively minor obstacles. What could be a typical troubleshooting procedure for this, what sorts of things typiucally go wrong. thanks a lot I presume the 2sp auto? If so, they're basically like an automotive auto tran; the primary thing that causes the symptom is seals are kaput. Outside chance if you haven't the filter could be clogged or a crimped line or low on fluid but I'd presume you've already checked for those obvious faults. -- |
#3
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On 6/10/2014 5:50 PM, Ignoramus32376 wrote:
I have two cat t150d forklifts. one is great, another is not so great, it has a weak transmission. with a load on the forks, this forklift cannot go over relatively minor obstacles. What could be a typical troubleshooting procedure for this, what sorts of things typiucally go wrong. thanks a lot I'v e got an Otis with a weak trany. My forklift guy is keeping an eye out for a used one because he says it isn't worth it to repair it and there's no easy fix. Might be the same situation for you. |
#4
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
Ignoramus32376 wrote:
I have two cat t150d forklifts. one is great, another is not so great, it has a weak transmission. with a load on the forks, this forklift cannot go over relatively minor obstacles. What could be a typical troubleshooting procedure for this, what sorts of things typiucally go wrong. thanks a lot Some dufus probably put the wrong oil in it. It should take ATF fluid. John |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Anyone use forklift? | Home Repair | |||
Low-Speed Forklift Chase Ends In Arrest - OAKLAND CA - Sell forklift forscrap? | Home Repair | |||
Transmission line stuff - transmission line.asc | Electronic Schematics | |||
high side sensor transmission using pnp string - pnp string for high-side sensing transmission.pdf (1/1) | Electronic Schematics | |||
high side sensor transmission using pnp string - pnp string for high-side sensing transmission.pdf (0/1) | Electronic Schematics |