Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Paint -- anyone else?
Just want to confirm some results -- wondering if anyone can back me up on this.
Aluminum part that I sanded for paint grab and cleaned with denatured alcohol. I've tried a lot of paint techniques ranging from professional 2 part coatings, different primers etc but wanted something good for occasional use that I could get in a can. (1) been priming with epoxy paint, let dry well and lightly sand to get smooth) (2) 2nd coat, texture black Ok, if you let dry for 30 days but here's what I recently did -- added another top coat of rustoleum ultra high temp black and baked in 250 oven for a few hours. wow -- instant durability. (in a can, no less). anyone else? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Lowes Paint Counter vs. A Real Paint Store | Home Repair | |||
Peel-A-Way Paint Remover For Latex Paint: Any Good ? | Home Repair | |||
Decorating question: to paint or not to paint hardware | Home Repair | |||
Can you mix primer/sealer and paint (exterior house paint)? | Home Repair | |||
indoor walls: spray paint or roll paint with rollers? | Home Repair |