Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Proper work attire
For people who do thier best work under pressure.
http://mobile.theverge.com/2014/2/28...e-you-can-wear Best Regards Tom. -- http://fija.org/ |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Proper work attire
On 3/5/2014 1:20 AM, azotic wrote:
For people who do thier best work under pressure. http://mobile.theverge.com/2014/2/28...e-you-can-wear Best Regards Tom. Ah, the old Newt Suit. Named originally for "neutrally buoyant" suit, and a take off of the inventor's name. Can't remember the company who originally did it, but they were about a block away from our shop in Lafayette, Louisiana. Oceaneering got into them quite a bit. The are impressive, considering they are neutral underwater, and very easy to control and propel. Diver exertion is MUCH less than swimming, or walking underwater in regular dive packages. The specs say the new ones have two 2.25 hp 400 hz motors. They have unlimited bottom time, and no decompression. Jump in, jump out. I almost got to dive one once, but got aced out. IIRC, current test depth is 900m. It was called "a submarine you wear". It is in a total different category from any other subsea working suit. Advances in metals, seals, and all of the components have brought it into the forefront of the diving world. It does have some downsides, but is just a downright tank. Just be extremely aware of entanglement issues, and empty bodily holding chambers before getting into one. I'd still like to dive one. Steve |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|