Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 12,924
Default Any Army guys remember the PS Magazine for preventive maintenance?


Any Army guys remember the PS Magazine for preventive maintenance? Lots
of tips on maintaining military vehicles, weapons and other equipment.

Here is a partial archive of issues:

http://psmag.radionerds.com/index.php/Main_Page
--
Anyone wanting to run for any political office in the US should have to
have a DD214, and a honorable discharge.
  #2   Report Post  
Posted to rec.crafts.metalworking
PCS PCS is offline
external usenet poster
 
Posts: 63
Default Any Army guys remember the PS Magazine for preventive maintenance?

On Saturday, January 4, 2014 12:52:10 AM UTC-5, Michael Terrell wrote:
Any Army guys remember the PS Magazine for preventive maintenance? Lots

of tips on maintaining military vehicles, weapons and other equipment.



Here is a partial archive of issues:



http://psmag.radionerds.com/index.php/Main_Page



Boy-o-boy I sure do. Spent many idle hours reading them in the Motor Pool in Korea.
When I served in the 70's, Jeeps were real Jeeps, not these new-fangled Humvees!

As the 2nd Infantry Division's Courier, I drove a daily 100-mile loop in my Jeep, from Tongduchon to the DMZ, delivering each Brigade's mail and movies. Mostly dirt roads and mountain trails at the time.

My Jeep was tricked out with a hard-to-get canvas top/doors, and a crossed-flag signal company spare-tire cover that boasted: "You've seen the rest, now meet the best". 122nd Signal Battalion.

Nice thing about being the courier was that my issued weapon was a .45cal pistol, not an M16. When I walked into any of the many local bars, as was often the case on the trip home, the .45 strapped to my hip always elicited extra respect from the hookers.

Also, the MPs never messed with the courier jeep. Wherever I was headed, the pedal was always to the metal.

As I recall, PS magazine often used a couple of hot bikini-clad chicks in the cartoons to keep us kids reading, one Caucasian blondie, one African American gal. They were fine fantasy material for any 18-year old. Might even have learned something from them.

Thanks for the link to old memories. Good times.

--
PaulS
  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 12,924
Default Any Army guys remember the PS Magazine for preventive maintenance?


PCS wrote:

On Saturday, January 4, 2014 12:52:10 AM UTC-5, Michael Terrell wrote:
Any Army guys remember the PS Magazine for preventive maintenance? Lots

of tips on maintaining military vehicles, weapons and other equipment.



Here is a partial archive of issues:



http://psmag.radionerds.com/index.php/Main_Page


Boy-o-boy I sure do. Spent many idle hours reading them in the Motor Pool in Korea.
When I served in the 70's, Jeeps were real Jeeps, not these new-fangled Humvees!

As the 2nd Infantry Division's Courier, I drove a daily 100-mile loop in my Jeep, from Tongduchon to the DMZ, delivering each Brigade's mail and movies. Mostly dirt roads and mountain trails at the time.

My Jeep was tricked out with a hard-to-get canvas top/doors, and a crossed-flag signal company spare-tire cover that boasted: "You've seen the rest, now meet the best". 122nd Signal Battalion.



Heh. The MPs tried to screw with WeatherVision at FT. Rucker. Every
one that tried, learned a hard lesson whenever they tried to stop me
from doing my job.


Nice thing about being the courier was that my issued weapon was a .45cal pistol, not an M16. When I walked into any of the many local bars, as was often the case on the trip home, the .45 strapped to my hip always elicited extra respect from the hookers.

Also, the MPs never messed with the courier jeep. Wherever I was headed, the pedal was always to the metal.

As I recall, PS magazine often used a couple of hot bikini-clad chicks in the cartoons to keep us kids reading, one Caucasian blondie, one African American gal. They were fine fantasy material for any 18-year old. Might even have learned something from them.

Thanks for the link to old memories. Good times.



You're welcome. There is a lot of metal working tips in the older
issues, when they couldn't get enough parts in Korea.
--
Anyone wanting to run for any political office in the US should have to
have a DD214, and a honorable discharge.
  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 2,584
Default Any Army guys remember the PS Magazine for preventive maintenance?

On 2014-01-04, Michael A. Terrell wrote:

Any Army guys remember the PS Magazine for preventive maintenance? Lots
of tips on maintaining military vehicles, weapons and other equipment.

Here is a partial archive of issues:

http://psmag.radionerds.com/index.php/Main_Page


Not just Army guys. I was a civilian employee at an Army R&D
lab, and used to love going through those magazines.

Thanks,
DoN.

--
Remove oil spill source from e-mail
Email: | (KV4PH) Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
  #5   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 12,924
Default Any Army guys remember the PS Magazine for preventive maintenance?


"DoN. Nichols" wrote:

On 2014-01-04, Michael A. Terrell wrote:

Any Army guys remember the PS Magazine for preventive maintenance? Lots
of tips on maintaining military vehicles, weapons and other equipment.

Here is a partial archive of issues:

http://psmag.radionerds.com/index.php/Main_Page


Not just Army guys. I was a civilian employee at an Army R&D
lab, and used to love going through those magazines.

Thanks,
DoN.



You're welcome. Anyone who really does metalworking, or maintains
their own vehicles can learn a lot of useful tricks in that archive.
There is a fair amount of information on all types of weapons, from
handguns to tanks.


--
Anyone wanting to run for any political office in the US should have to
have a DD214, and a honorable discharge.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Furnace preventive maintenance [email protected] Home Repair 2 March 11th 08 05:31 PM
Amana Washing Machine-Preventive maintenance 427Cobraman Home Repair 0 August 9th 06 09:53 PM
Termite preventive maintenance [email protected] Home Repair 10 May 1st 05 03:49 PM
Can't remember who put out a magazine on building furniture Brooklin Woodworking 4 December 10th 03 10:34 PM
Symmons Temptrol Tub/Shower valves-Preventive Maintenance Jeff Wisnia Home Repair 1 December 6th 03 07:38 AM


All times are GMT +1. The time now is 04:15 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"