Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
update on Servo Products drive on BP
A few weeks ago I posted about my drive for the "X" axis on my BP that
died. I ended up only replacing the circuit board for $107 and the boot on the full speed switch for $6. The motor had no smell so I started with just the board. The upgrade board is for a model 150 from my model 100. It works much smoother with finer speed control. This unit is just a much better unit than the imports! I win! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Servo drive spec for EMC2 use | Metalworking | |||
Servo drive failed | Metalworking | |||
Wired Z axis servo drive | Metalworking | |||
Ran a motor with servo drive today | Metalworking | |||
ANN: New small servo products, power supply kit on display at Iron Fever | Metalworking |