Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
r11 r11 is offline
external usenet poster
 
Posts: 5
Default A simple repair for Harbor Freight Honda-clone generator

Had mine for 3+ years now, stored outdoors. A very faithful Honda 7500-watt-max generator clone (EM6500SX).

While not Alaska, we do get some colder weather here in Poconos. Spent something like $300 on it and she's been real work horse, from construction (would weld for hours) to running whole house (including electrical water heater (!) and well pump) during storms. No issues with electronics either.

She developed a problem where she'd start, run literally for a second and then shutdown. After waiting for a min or so, you can again start er up for a second.

Deeper dive revealed that solenoid-driven shut-off needle on the bottom of the carb got gunked up and stuck, choking off fuel to the carburetor nozzle..

If possible attempt to remove the solenoid assy from the bottom, just 2 screws. If not possible, remove the air filter box and then the carburetor.

The construction (I guess credit should really go to Honda) is very repair friendly.

As usual, do treat that E10 fuel with Stabil when weather gets colder.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Honda Inverter Generator Repair Advice please! Greg[_11_] Home Repair 4 December 11th 08 12:19 AM
Harbor Freight Tormek Clone Grinder $68-COUPON -MIKE- Woodworking 8 November 22nd 08 10:12 PM
Harbor Freight Tormek Clone J. Clarke Woodworking 29 November 21st 08 02:09 PM
MultiMaster Clone in Harbor Freight, Any Good? Jay Chan Home Repair 15 November 20th 08 03:05 AM
Harbor Freight Robin Subaru Generator ? AL Metalworking 25 March 28th 06 05:31 PM


All times are GMT +1. The time now is 09:44 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"