Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Hammer ID marks?
Ive been cleaning up my tools, putting new handles on the (rather
large) number of hammer heads Ive aquired over the last few years..and was cleaning up a 4lb shop hammer head and noticed it was marked with some various casting graphic marks and started wondering..is there any source out there that cover this sort of thing? This particular head has two triangle shaped graphics, one with a single dot in it..and the other with 3 dots in a triangle shape and what might be a makers mark..but its been bashed on at one time and unreadable..or its the hammer end of the casting sprue...shrug. No biggy..but was wondering if there are any websites that covers this sort of thing? I did a couple minute search..but my Google Fu must be weak today. Anyone? Gunner The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Hammer Drill or Rotary Hammer for poured concrete wall | Home Repair | |||
Down the hole hammer drilling and top hammer drilling equipment | Woodturning | |||
DTH(Down the hole hammer) drilling and top hammer drilling equipment | Home Repair | |||
Down the hole hammer drilling and top hammer drilling equipment | Home Repair | |||
Hammer drill lost its hammer | UK diy |