Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,346
Default Ford F250 Starter problem

My roommate has a '97 F250 7.2L gas, XLT 4 door pickup with a starter
problem.

She hits start..the starter solenoid on the fender well clicks..no
start.

I shorted across the primary power leads of the starter solenoid..no
start.

I had her hold the key in the start position and crawled underneith
and shorted across the two big nuts on the starter.... and it started.

I didnt think at the time to measure the small red wire power to the
solenoid ON the starter and only realized it as I sat down to type
this..damnit. I should know better..sigh

Assuming there is a start signal TO the bendix solenoid "coil"...can
they be repaired or is a starter replacement required.

I used to be pretty damned good at this sort of thing..the
stroke...shrug

Hell..I cant even remember the name for the coil that drives the
bendix.

Or am I missing something? This LOOKs like a basic starter with
switch operated solenoid ON the starter...powered by the small red
wire...but come to think of it..that fender mounted solenoid...wtf?

Sigh.

Help?


Gunner

The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
1977 Ford F250 sector shaft spray welding oldjag Metalworking 0 February 2nd 10 03:54 AM
1977 Ford F250 sector shaft spray welding Christopher Tidy Metalworking 1 February 2nd 10 02:57 AM
1977 Ford F250 sector shaft spray welding [email protected] Metalworking 0 February 1st 10 08:07 PM
Four Tips When Choosing New Ford Truck Seat Covers.(ford truckaccessory) [email protected] Home Repair 0 March 29th 08 04:12 AM
'84 Ford diesel F250? Grant Erwin Metalworking 6 February 14th 06 05:40 AM


All times are GMT +1. The time now is 01:06 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"