Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,346
Default Ping Iggy

http://www.salvex.com/listings/listi...ucID=182948872


Just what you need!!


Gunner

The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie
  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 5
Default Ping Iggy

On 2012-12-22, Gunner wrote:
http://www.salvex.com/listings/listi...ucID=182948872


Just what you need!!


My semi tractor/trailer is kind of a wrecker, it has a beavertail
trailer and a winch. We used it already to move various heavy duty
trucks that I parted out or will do so.

i
  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,346
Default Ping Iggy

On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595
wrote:

On 2012-12-22, Gunner wrote:
http://www.salvex.com/listings/listi...ucID=182948872


Just what you need!!


My semi tractor/trailer is kind of a wrecker, it has a beavertail
trailer and a winch. We used it already to move various heavy duty
trucks that I parted out or will do so.

i


But does it have a crane???


Manufacturer/Model: AM General M816 Medium
Engine: Cummings NHC-250, 250 horsepower, 6 Cylinder Diesel
Transmission: Manual 5 Speed and a 2 Speed Transfer Case
Max Speed: 50 mph
Gas Mileage: Approximately 6 mpg
Towing Capacity: 14 Tons (on road), 10 Tons (cross country or off
road)
Front/Rear Winch Capacity: 20,000 lbs (Front), 45,000 lbs (Rear)
Boom: Elevates to 45 degrees, Swings to 270 degrees (can be
modified to 360 degrees)
Revolving hydraulic crane with an extending boom that can extend
from 10--18 ft
Specially built for the United States Army to pull medium duty
equipment through non-incorporated terrain


VBG

Or maybe one of these?

http://olive-drab.com/idphoto/id_pho...covery_m88.php


Seen this link btw?

http://www.russianarmysurplus.com/

For some reason..I have this mental picture of you driving around with
the back of your pickup filled with Surplus....with one of these on
your head and a mad grin on your face...

http://www.russianarmysurplus.com/pr...rborne-helmet/

VBG


Gunner

The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie
  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 5
Default Ping Iggy

On 2012-12-23, Gunner wrote:
On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595
wrote:

On 2012-12-22, Gunner wrote:
http://www.salvex.com/listings/listi...ucID=182948872


Just what you need!!


My semi tractor/trailer is kind of a wrecker, it has a beavertail
trailer and a winch. We used it already to move various heavy duty
trucks that I parted out or will do so.

i


But does it have a crane???


It does not, but I do have a boom crane laying around right now.

I planned to sell it, but maybe I can mount it on the trailer?

It is a National Knuckle Boom Crane:

https://picasaweb.google.com/lh/phot...eat=directlink

I am reluctant to install it, because it will reduce the capacity of
my semi trailer by 4-5k lbs.

i


Manufacturer/Model: AM General M816 Medium
Engine: Cummings NHC-250, 250 horsepower, 6 Cylinder Diesel
Transmission: Manual 5 Speed and a 2 Speed Transfer Case
Max Speed: 50 mph
Gas Mileage: Approximately 6 mpg
Towing Capacity: 14 Tons (on road), 10 Tons (cross country or off
road)
Front/Rear Winch Capacity: 20,000 lbs (Front), 45,000 lbs (Rear)
Boom: Elevates to 45 degrees, Swings to 270 degrees (can be
modified to 360 degrees)
Revolving hydraulic crane with an extending boom that can extend
from 10--18 ft
Specially built for the United States Army to pull medium duty
equipment through non-incorporated terrain


VBG

Or maybe one of these?

http://olive-drab.com/idphoto/id_pho...covery_m88.php


Seen this link btw?

http://www.russianarmysurplus.com/

For some reason..I have this mental picture of you driving around with
the back of your pickup filled with Surplus....with one of these on
your head and a mad grin on your face...

http://www.russianarmysurplus.com/pr...rborne-helmet/

VBG


Gunner

The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie

  #5   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 9,025
Default Ping Iggy

On Sat, 22 Dec 2012 20:26:58 -0600, Ignoramus26595
wrote:

On 2012-12-23, Gunner wrote:
On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595
wrote:

On 2012-12-22, Gunner wrote:
http://www.salvex.com/listings/listi...ucID=182948872


Just what you need!!


My semi tractor/trailer is kind of a wrecker, it has a beavertail
trailer and a winch. We used it already to move various heavy duty
trucks that I parted out or will do so.

i


But does it have a crane???


It does not, but I do have a boom crane laying around right now.

I planned to sell it, but maybe I can mount it on the trailer?

It is a National Knuckle Boom Crane:

https://picasaweb.google.com/lh/phot...eat=directlink

I am reluctant to install it, because it will reduce the capacity of
my semi trailer by 4-5k lbs.


Sell it and wait for a whole knuckle boom truck. What a back-saver!
Knowing you, you'll find the chrome plated boom on a truck for $5, and
the only problem it has is that it needs one spark plug wire.

--
There is nothing more frightening than ignorance in action.

--Johann Wolfgang von Goethe


  #6   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 12
Default Ping Iggy

On 2012-12-23, Larry Jaques wrote:
On Sat, 22 Dec 2012 20:26:58 -0600, Ignoramus26595
wrote:

On 2012-12-23, Gunner wrote:
On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595
wrote:

On 2012-12-22, Gunner wrote:
http://www.salvex.com/listings/listi...ucID=182948872


Just what you need!!


My semi tractor/trailer is kind of a wrecker, it has a beavertail
trailer and a winch. We used it already to move various heavy duty
trucks that I parted out or will do so.

i

But does it have a crane???


It does not, but I do have a boom crane laying around right now.

I planned to sell it, but maybe I can mount it on the trailer?

It is a National Knuckle Boom Crane:

https://picasaweb.google.com/lh/phot...eat=directlink

I am reluctant to install it, because it will reduce the capacity of
my semi trailer by 4-5k lbs.


Sell it and wait for a whole knuckle boom truck. What a back-saver!
Knowing you, you'll find the chrome plated boom on a truck for $5, and
the only problem it has is that it needs one spark plug wire.


I will see... I decided that this year in business I will not be
acquiring any capital equipment, just making money with what I
have. But I see your point.
  #7   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,346
Default Ping Iggy

On Sat, 22 Dec 2012 20:26:58 -0600, Ignoramus26595
wrote:

On 2012-12-23, Gunner wrote:
On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595
wrote:

On 2012-12-22, Gunner wrote:
http://www.salvex.com/listings/listi...ucID=182948872


Just what you need!!


My semi tractor/trailer is kind of a wrecker, it has a beavertail
trailer and a winch. We used it already to move various heavy duty
trucks that I parted out or will do so.

i


But does it have a crane???


It does not, but I do have a boom crane laying around right now.

I planned to sell it, but maybe I can mount it on the trailer?

It is a National Knuckle Boom Crane:

https://picasaweb.google.com/lh/phot...eat=directlink

I am reluctant to install it, because it will reduce the capacity of
my semi trailer by 4-5k lbs.


Thats a small price to pay if you buy something that has no forklift
available..isnt it?

Gunner


i


Manufacturer/Model: AM General M816 Medium
Engine: Cummings NHC-250, 250 horsepower, 6 Cylinder Diesel
Transmission: Manual 5 Speed and a 2 Speed Transfer Case
Max Speed: 50 mph
Gas Mileage: Approximately 6 mpg
Towing Capacity: 14 Tons (on road), 10 Tons (cross country or off
road)
Front/Rear Winch Capacity: 20,000 lbs (Front), 45,000 lbs (Rear)
Boom: Elevates to 45 degrees, Swings to 270 degrees (can be
modified to 360 degrees)
Revolving hydraulic crane with an extending boom that can extend
from 10--18 ft
Specially built for the United States Army to pull medium duty
equipment through non-incorporated terrain


VBG

Or maybe one of these?

http://olive-drab.com/idphoto/id_pho...covery_m88.php


Seen this link btw?

http://www.russianarmysurplus.com/

For some reason..I have this mental picture of you driving around with
the back of your pickup filled with Surplus....with one of these on
your head and a mad grin on your face...

http://www.russianarmysurplus.com/pr...rborne-helmet/

VBG


Gunner

The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie


The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie
  #8   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 12
Default Ping Iggy

On 2012-12-23, Gunner wrote:
On Sat, 22 Dec 2012 20:26:58 -0600, Ignoramus26595
wrote:

On 2012-12-23, Gunner wrote:
On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595
wrote:

On 2012-12-22, Gunner wrote:
http://www.salvex.com/listings/listi...ucID=182948872


Just what you need!!


My semi tractor/trailer is kind of a wrecker, it has a beavertail
trailer and a winch. We used it already to move various heavy duty
trucks that I parted out or will do so.

i

But does it have a crane???


It does not, but I do have a boom crane laying around right now.

I planned to sell it, but maybe I can mount it on the trailer?

It is a National Knuckle Boom Crane:

https://picasaweb.google.com/lh/phot...eat=directlink

I am reluctant to install it, because it will reduce the capacity of
my semi trailer by 4-5k lbs.


Thats a small price to pay if you buy something that has no forklift
available..isnt it?


That's what I Was saying, we take our forklifts with us on our semi
trailer. It is a beavertail trailer with hydraulic tail.

i

Gunner


i


Manufacturer/Model: AM General M816 Medium
Engine: Cummings NHC-250, 250 horsepower, 6 Cylinder Diesel
Transmission: Manual 5 Speed and a 2 Speed Transfer Case
Max Speed: 50 mph
Gas Mileage: Approximately 6 mpg
Towing Capacity: 14 Tons (on road), 10 Tons (cross country or off
road)
Front/Rear Winch Capacity: 20,000 lbs (Front), 45,000 lbs (Rear)
Boom: Elevates to 45 degrees, Swings to 270 degrees (can be
modified to 360 degrees)
Revolving hydraulic crane with an extending boom that can extend
from 10--18 ft
Specially built for the United States Army to pull medium duty
equipment through non-incorporated terrain


VBG

Or maybe one of these?

http://olive-drab.com/idphoto/id_pho...covery_m88.php


Seen this link btw?

http://www.russianarmysurplus.com/

For some reason..I have this mental picture of you driving around with
the back of your pickup filled with Surplus....with one of these on
your head and a mad grin on your face...

http://www.russianarmysurplus.com/pr...rborne-helmet/

VBG


Gunner

The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie


The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie

  #9   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 9,025
Default Ping Iggy

On Sat, 22 Dec 2012 14:43:28 -0800, Gunner
wrote:

http://www.salvex.com/listings/listi...ucID=182948872


Just what you need!


Fun! Think they'll get the reserve price of $18.4k? Me, neither.

--
There is nothing more frightening than ignorance in action.

--Johann Wolfgang von Goethe
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ping Iggy Tom Gardner[_6_] Metalworking 4 October 26th 12 02:58 AM
PING: Iggy Steve Walker[_4_] Metalworking 24 December 30th 11 02:02 AM
Ping: Iggy Jon Danniken Metalworking 11 May 12th 08 06:01 PM
Ping Iggy... Todd Rich Metalworking 10 December 26th 07 04:52 PM
Ping: Iggy Jon Danniken Metalworking 1 September 15th 07 06:27 PM


All times are GMT +1. The time now is 04:11 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"