|
Ping Iggy
http://www.salvex.com/listings/listi...ucID=182948872
Just what you need!! Gunner The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie |
Ping Iggy
On 2012-12-22, Gunner wrote:
http://www.salvex.com/listings/listi...ucID=182948872 Just what you need!! My semi tractor/trailer is kind of a wrecker, it has a beavertail trailer and a winch. We used it already to move various heavy duty trucks that I parted out or will do so. i |
Ping Iggy
On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595
wrote: On 2012-12-22, Gunner wrote: http://www.salvex.com/listings/listi...ucID=182948872 Just what you need!! My semi tractor/trailer is kind of a wrecker, it has a beavertail trailer and a winch. We used it already to move various heavy duty trucks that I parted out or will do so. i But does it have a crane??? Manufacturer/Model: AM General M816 Medium Engine: Cummings NHC-250, 250 horsepower, 6 Cylinder Diesel Transmission: Manual 5 Speed and a 2 Speed Transfer Case Max Speed: 50 mph Gas Mileage: Approximately 6 mpg Towing Capacity: 14 Tons (on road), 10 Tons (cross country or off road) Front/Rear Winch Capacity: 20,000 lbs (Front), 45,000 lbs (Rear) Boom: Elevates to 45 degrees, Swings to 270 degrees (can be modified to 360 degrees) Revolving hydraulic crane with an extending boom that can extend from 10--18 ft Specially built for the United States Army to pull medium duty equipment through non-incorporated terrain VBG Or maybe one of these? http://olive-drab.com/idphoto/id_pho...covery_m88.php Seen this link btw? http://www.russianarmysurplus.com/ For some reason..I have this mental picture of you driving around with the back of your pickup filled with Surplus....with one of these on your head and a mad grin on your face... http://www.russianarmysurplus.com/pr...rborne-helmet/ VBG Gunner The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie |
Ping Iggy
On 2012-12-23, Gunner wrote:
On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595 wrote: On 2012-12-22, Gunner wrote: http://www.salvex.com/listings/listi...ucID=182948872 Just what you need!! My semi tractor/trailer is kind of a wrecker, it has a beavertail trailer and a winch. We used it already to move various heavy duty trucks that I parted out or will do so. i But does it have a crane??? It does not, but I do have a boom crane laying around right now. I planned to sell it, but maybe I can mount it on the trailer? It is a National Knuckle Boom Crane: https://picasaweb.google.com/lh/phot...eat=directlink I am reluctant to install it, because it will reduce the capacity of my semi trailer by 4-5k lbs. i Manufacturer/Model: AM General M816 Medium Engine: Cummings NHC-250, 250 horsepower, 6 Cylinder Diesel Transmission: Manual 5 Speed and a 2 Speed Transfer Case Max Speed: 50 mph Gas Mileage: Approximately 6 mpg Towing Capacity: 14 Tons (on road), 10 Tons (cross country or off road) Front/Rear Winch Capacity: 20,000 lbs (Front), 45,000 lbs (Rear) Boom: Elevates to 45 degrees, Swings to 270 degrees (can be modified to 360 degrees) Revolving hydraulic crane with an extending boom that can extend from 10--18 ft Specially built for the United States Army to pull medium duty equipment through non-incorporated terrain VBG Or maybe one of these? http://olive-drab.com/idphoto/id_pho...covery_m88.php Seen this link btw? http://www.russianarmysurplus.com/ For some reason..I have this mental picture of you driving around with the back of your pickup filled with Surplus....with one of these on your head and a mad grin on your face... http://www.russianarmysurplus.com/pr...rborne-helmet/ VBG Gunner The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie |
Ping Iggy
On Sat, 22 Dec 2012 14:43:28 -0800, Gunner
wrote: http://www.salvex.com/listings/listi...ucID=182948872 Just what you need! Fun! Think they'll get the reserve price of $18.4k? Me, neither. -- There is nothing more frightening than ignorance in action. --Johann Wolfgang von Goethe |
Ping Iggy
On Sat, 22 Dec 2012 20:26:58 -0600, Ignoramus26595
wrote: On 2012-12-23, Gunner wrote: On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595 wrote: On 2012-12-22, Gunner wrote: http://www.salvex.com/listings/listi...ucID=182948872 Just what you need!! My semi tractor/trailer is kind of a wrecker, it has a beavertail trailer and a winch. We used it already to move various heavy duty trucks that I parted out or will do so. i But does it have a crane??? It does not, but I do have a boom crane laying around right now. I planned to sell it, but maybe I can mount it on the trailer? It is a National Knuckle Boom Crane: https://picasaweb.google.com/lh/phot...eat=directlink I am reluctant to install it, because it will reduce the capacity of my semi trailer by 4-5k lbs. Sell it and wait for a whole knuckle boom truck. What a back-saver! Knowing you, you'll find the chrome plated boom on a truck for $5, and the only problem it has is that it needs one spark plug wire. ;) -- There is nothing more frightening than ignorance in action. --Johann Wolfgang von Goethe |
Ping Iggy
On Sat, 22 Dec 2012 20:26:58 -0600, Ignoramus26595
wrote: On 2012-12-23, Gunner wrote: On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595 wrote: On 2012-12-22, Gunner wrote: http://www.salvex.com/listings/listi...ucID=182948872 Just what you need!! My semi tractor/trailer is kind of a wrecker, it has a beavertail trailer and a winch. We used it already to move various heavy duty trucks that I parted out or will do so. i But does it have a crane??? It does not, but I do have a boom crane laying around right now. I planned to sell it, but maybe I can mount it on the trailer? It is a National Knuckle Boom Crane: https://picasaweb.google.com/lh/phot...eat=directlink I am reluctant to install it, because it will reduce the capacity of my semi trailer by 4-5k lbs. Thats a small price to pay if you buy something that has no forklift available..isnt it? Gunner i Manufacturer/Model: AM General M816 Medium Engine: Cummings NHC-250, 250 horsepower, 6 Cylinder Diesel Transmission: Manual 5 Speed and a 2 Speed Transfer Case Max Speed: 50 mph Gas Mileage: Approximately 6 mpg Towing Capacity: 14 Tons (on road), 10 Tons (cross country or off road) Front/Rear Winch Capacity: 20,000 lbs (Front), 45,000 lbs (Rear) Boom: Elevates to 45 degrees, Swings to 270 degrees (can be modified to 360 degrees) Revolving hydraulic crane with an extending boom that can extend from 10--18 ft Specially built for the United States Army to pull medium duty equipment through non-incorporated terrain VBG Or maybe one of these? http://olive-drab.com/idphoto/id_pho...covery_m88.php Seen this link btw? http://www.russianarmysurplus.com/ For some reason..I have this mental picture of you driving around with the back of your pickup filled with Surplus....with one of these on your head and a mad grin on your face... http://www.russianarmysurplus.com/pr...rborne-helmet/ VBG Gunner The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie |
Ping Iggy
On 2012-12-23, Larry Jaques wrote:
On Sat, 22 Dec 2012 20:26:58 -0600, Ignoramus26595 wrote: On 2012-12-23, Gunner wrote: On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595 wrote: On 2012-12-22, Gunner wrote: http://www.salvex.com/listings/listi...ucID=182948872 Just what you need!! My semi tractor/trailer is kind of a wrecker, it has a beavertail trailer and a winch. We used it already to move various heavy duty trucks that I parted out or will do so. i But does it have a crane??? It does not, but I do have a boom crane laying around right now. I planned to sell it, but maybe I can mount it on the trailer? It is a National Knuckle Boom Crane: https://picasaweb.google.com/lh/phot...eat=directlink I am reluctant to install it, because it will reduce the capacity of my semi trailer by 4-5k lbs. Sell it and wait for a whole knuckle boom truck. What a back-saver! Knowing you, you'll find the chrome plated boom on a truck for $5, and the only problem it has is that it needs one spark plug wire. ;) I will see... I decided that this year in business I will not be acquiring any capital equipment, just making money with what I have. But I see your point. :) |
Ping Iggy
On 2012-12-23, Gunner wrote:
On Sat, 22 Dec 2012 20:26:58 -0600, Ignoramus26595 wrote: On 2012-12-23, Gunner wrote: On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595 wrote: On 2012-12-22, Gunner wrote: http://www.salvex.com/listings/listi...ucID=182948872 Just what you need!! My semi tractor/trailer is kind of a wrecker, it has a beavertail trailer and a winch. We used it already to move various heavy duty trucks that I parted out or will do so. i But does it have a crane??? It does not, but I do have a boom crane laying around right now. I planned to sell it, but maybe I can mount it on the trailer? It is a National Knuckle Boom Crane: https://picasaweb.google.com/lh/phot...eat=directlink I am reluctant to install it, because it will reduce the capacity of my semi trailer by 4-5k lbs. Thats a small price to pay if you buy something that has no forklift available..isnt it? That's what I Was saying, we take our forklifts with us on our semi trailer. It is a beavertail trailer with hydraulic tail. i Gunner i Manufacturer/Model: AM General M816 Medium Engine: Cummings NHC-250, 250 horsepower, 6 Cylinder Diesel Transmission: Manual 5 Speed and a 2 Speed Transfer Case Max Speed: 50 mph Gas Mileage: Approximately 6 mpg Towing Capacity: 14 Tons (on road), 10 Tons (cross country or off road) Front/Rear Winch Capacity: 20,000 lbs (Front), 45,000 lbs (Rear) Boom: Elevates to 45 degrees, Swings to 270 degrees (can be modified to 360 degrees) Revolving hydraulic crane with an extending boom that can extend from 10--18 ft Specially built for the United States Army to pull medium duty equipment through non-incorporated terrain VBG Or maybe one of these? http://olive-drab.com/idphoto/id_pho...covery_m88.php Seen this link btw? http://www.russianarmysurplus.com/ For some reason..I have this mental picture of you driving around with the back of your pickup filled with Surplus....with one of these on your head and a mad grin on your face... http://www.russianarmysurplus.com/pr...rborne-helmet/ VBG Gunner The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie |
Ping Iggy
On Sun, 23 Dec 2012 07:38:06 -0600, Ignoramus5654
wrote: On 2012-12-23, Gunner wrote: On Sat, 22 Dec 2012 20:26:58 -0600, Ignoramus26595 wrote: On 2012-12-23, Gunner wrote: On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595 wrote: On 2012-12-22, Gunner wrote: http://www.salvex.com/listings/listi...ucID=182948872 Just what you need!! My semi tractor/trailer is kind of a wrecker, it has a beavertail trailer and a winch. We used it already to move various heavy duty trucks that I parted out or will do so. i But does it have a crane??? It does not, but I do have a boom crane laying around right now. I planned to sell it, but maybe I can mount it on the trailer? It is a National Knuckle Boom Crane: https://picasaweb.google.com/lh/phot...eat=directlink I am reluctant to install it, because it will reduce the capacity of my semi trailer by 4-5k lbs. Thats a small price to pay if you buy something that has no forklift available..isnt it? That's what I Was saying, we take our forklifts with us on our semi trailer. It is a beavertail trailer with hydraulic tail. Ah! Then sell the crane indeed. If you ever find a Baker/Linde B30-PL...I need some parts. The carby and heat exchanger Gunner i Gunner i Manufacturer/Model: AM General M816 Medium Engine: Cummings NHC-250, 250 horsepower, 6 Cylinder Diesel Transmission: Manual 5 Speed and a 2 Speed Transfer Case Max Speed: 50 mph Gas Mileage: Approximately 6 mpg Towing Capacity: 14 Tons (on road), 10 Tons (cross country or off road) Front/Rear Winch Capacity: 20,000 lbs (Front), 45,000 lbs (Rear) Boom: Elevates to 45 degrees, Swings to 270 degrees (can be modified to 360 degrees) Revolving hydraulic crane with an extending boom that can extend from 10--18 ft Specially built for the United States Army to pull medium duty equipment through non-incorporated terrain VBG Or maybe one of these? http://olive-drab.com/idphoto/id_pho...covery_m88.php Seen this link btw? http://www.russianarmysurplus.com/ For some reason..I have this mental picture of you driving around with the back of your pickup filled with Surplus....with one of these on your head and a mad grin on your face... http://www.russianarmysurplus.com/pr...rborne-helmet/ VBG Gunner The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie |
Ping Iggy
On 2012-12-23, Gunner wrote:
On Sun, 23 Dec 2012 07:38:06 -0600, Ignoramus5654 wrote: On 2012-12-23, Gunner wrote: On Sat, 22 Dec 2012 20:26:58 -0600, Ignoramus26595 wrote: On 2012-12-23, Gunner wrote: On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595 wrote: On 2012-12-22, Gunner wrote: http://www.salvex.com/listings/listi...ucID=182948872 Just what you need!! My semi tractor/trailer is kind of a wrecker, it has a beavertail trailer and a winch. We used it already to move various heavy duty trucks that I parted out or will do so. i But does it have a crane??? It does not, but I do have a boom crane laying around right now. I planned to sell it, but maybe I can mount it on the trailer? It is a National Knuckle Boom Crane: https://picasaweb.google.com/lh/phot...eat=directlink I am reluctant to install it, because it will reduce the capacity of my semi trailer by 4-5k lbs. Thats a small price to pay if you buy something that has no forklift available..isnt it? That's what I Was saying, we take our forklifts with us on our semi trailer. It is a beavertail trailer with hydraulic tail. Ah! Then sell the crane indeed. If you ever find a Baker/Linde B30-PL...I need some parts. The carby and heat exchanger I have a lot of forklift carb parts. i |
Ping Iggy
On Sun, 23 Dec 2012 13:30:29 -0600, Ignoramus5654
wrote: On 2012-12-23, Gunner wrote: On Sun, 23 Dec 2012 07:38:06 -0600, Ignoramus5654 wrote: On 2012-12-23, Gunner wrote: On Sat, 22 Dec 2012 20:26:58 -0600, Ignoramus26595 wrote: On 2012-12-23, Gunner wrote: On Sat, 22 Dec 2012 17:01:35 -0600, Ignoramus26595 wrote: On 2012-12-22, Gunner wrote: http://www.salvex.com/listings/listi...ucID=182948872 Just what you need!! My semi tractor/trailer is kind of a wrecker, it has a beavertail trailer and a winch. We used it already to move various heavy duty trucks that I parted out or will do so. i But does it have a crane??? It does not, but I do have a boom crane laying around right now. I planned to sell it, but maybe I can mount it on the trailer? It is a National Knuckle Boom Crane: https://picasaweb.google.com/lh/phot...eat=directlink I am reluctant to install it, because it will reduce the capacity of my semi trailer by 4-5k lbs. Thats a small price to pay if you buy something that has no forklift available..isnt it? That's what I Was saying, we take our forklifts with us on our semi trailer. It is a beavertail trailer with hydraulic tail. Ah! Then sell the crane indeed. If you ever find a Baker/Linde B30-PL...I need some parts. The carby and heat exchanger I have a lot of forklift carb parts. i Ill have to check and see what Carb and exchanger is on it. I think the exchanger is a F5 or something. Got Impco Parts? Ill check and post what I need. I need to rebuild the carb and likely the heat exchanger. Carby most of all. The kits were around $30 each, but they redesigned the carby and the whole top end kit is $100. And the forklift is still sitting at the end of my driveway 8 months later....damnit. Gunner, who wrote it down and now cant find it...damnit. The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie |
Ping Iggy
On 2012-12-23, Gunner wrote:
Ill have to check and see what Carb and exchanger is on it. I think the exchanger is a F5 or something. Got Impco Parts? Ill check and post what I need. I need to rebuild the carb and likely the heat exchanger. Carby most of all. The kits were around $30 each, but they redesigned the carby and the whole top end kit is $100. And the forklift is still sitting at the end of my driveway 8 months later....damnit. Gunner, who wrote it down and now cant find it...damnit. We converted one forklift to propane and fixed another forklift's propane carb system. I did not do it, my driver did, who is an all around handy person. Based on that experience, I think that most forklift propane related parts are very similar and many are interchangeable. Impco makes those propane conversion kits, it is not something super unusual. I bought a couple of pallets of propane kits and carbs last July. (also about four crates of forklift manuals for $50) i |
Ping Iggy
On Sun, 23 Dec 2012 16:18:39 -0600, Ignoramus5654
wrote: On 2012-12-23, Gunner wrote: Ill have to check and see what Carb and exchanger is on it. I think the exchanger is a F5 or something. Got Impco Parts? Ill check and post what I need. I need to rebuild the carb and likely the heat exchanger. Carby most of all. The kits were around $30 each, but they redesigned the carby and the whole top end kit is $100. And the forklift is still sitting at the end of my driveway 8 months later....damnit. Gunner, who wrote it down and now cant find it...damnit. We converted one forklift to propane and fixed another forklift's propane carb system. I did not do it, my driver did, who is an all around handy person. Based on that experience, I think that most forklift propane related parts are very similar and many are interchangeable. Impco makes those propane conversion kits, it is not something super unusual. I bought a couple of pallets of propane kits and carbs last July. (also about four crates of forklift manuals for $50) i If you find a manual for a Baker B30-PL..Ill send you a nice money order for it. (it was made by Linde..has a VW Jetta engine in it and is hydrostatic drive) Gunner The methodology of the left has always been: 1. Lie 2. Repeat the lie as many times as possible 3. Have as many people repeat the lie as often as possible 4. Eventually, the uninformed believe the lie 5. The lie will then be made into some form oflaw 6. Then everyone must conform to the lie |
| All times are GMT +1. The time now is 10:50 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter